What is a High temperature rotary bottom heating furnace? Introduction to the principle of forging furnace structure

High temperature rotary bottom heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，modern technology。

1、Brief introduction of High temperature rotary bottom heating furnace

High temperature rotary bottom heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

High temperature rotary bottom heating furnace

2、High temperature rotary bottom heating furnace structure

The High temperature rotary bottom heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

High temperature rotary bottom heating furnace

3、High temperature rotary bottom heating furnace principle

High temperature rotary bottom heating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is designed by One-combustion energy saving with advanced technology。

High temperature rotary bottom heating furnace

4、High temperature rotary bottom heating furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the High temperature rotary bottom heating furnace production process and production site, and gain favorable comments and recognition from customers.。

High temperature rotary bottom heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The structural design is simple, novel and special.，the main structure includes ventilation system, ventilation system, Radiation chamber, recovery of waste heat, combustor and so on。

5、High temperature rotary bottom heating furnace advantage

The advantages of High temperature rotary bottom heating furnace are as follows:

1. easy to operate

The operation interface of the High temperature rotary bottom heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Intelligent control

The High temperature rotary bottom heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Wide application range

The High temperature rotary bottom heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Uniform heating

The High temperature rotary bottom heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

High temperature rotary bottom heating furnace

6、High temperature rotary bottom heating furnace use

The purpose of High temperature rotary bottom heating furnace is introduced as follows:

1. Metal forging heating

The High temperature rotary bottom heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The High temperature rotary bottom heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, High temperature rotary bottom heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the High temperature rotary bottom heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal tempering

By properly heating and cooling the metal material, the High temperature rotary bottom heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

High temperature rotary bottom heating furnace

High temperature rotary bottom heating furnacethe product looks atmospheric.，features include Strong adaptability, Stable and reliable, Easy to control, energy-efficient and Easy to maintain。