What is a Metallurgical heating furnace? Introduction to the Working Principle of Forging furnace

Metallurgical heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，multifunctional, with functions such as quench, heat treatment, anneal, hardening and tempering and normalizing，support customization。The following is to introduce the Metallurgical heating furnace:

1、Brief introduction of Metallurgical heating furnace

Metallurgical heating furnaceIt is a forging heating device using gas as fuel.，is a Metallurgical heating furnace。

Metallurgical heating furnace

2、Metallurgical heating furnace advantage

The advantages of Metallurgical heating furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Efficient combustion

The Metallurgical heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The Metallurgical heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Uniform heating

The Metallurgical heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Multiple fuel options

Although the Metallurgical heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Metallurgical heating furnace

3、Metallurgical heating furnace function

Metallurgical heating furnaceit has the functions of Casting heating, Forging heating, normalizing, temper and anneal，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Metallurgical heating furnace

4、Metallurgical heating furnace characteristics

The Metallurgical heating furnace features are as follows:

1. Efficient heating

The Metallurgical heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Metallurgical heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Metallurgical heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Metallurgical heating furnace

5、Introduction of Metallurgical heating furnace characteristics

Metallurgical heating furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Metallurgical heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Efficient heating

The Metallurgical heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Stable and reliable

The Metallurgical heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The Metallurgical heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to maintain

The structural design of the Metallurgical heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Metallurgical heating furnace

6、Metallurgical heating furnace characteristics

The Metallurgical heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Metallurgical heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Strong adaptability

The Metallurgical heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Efficient heating

The Metallurgical heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Stable and reliable

The Metallurgical heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Metallurgical heating furnace

Metallurgical heating furnacewidely used inHousehold necessities,building materials,material,electron,metallurgy and other industries，It has the functions of Improve production efficiency, Energy conservation and environmental protection, Metal tempering, Metal heat treatment and Improve production efficiency，It is an efficient, energy-saving and environment-friendly metal heating device.。