Introduction to Stick style bright annealing furnace and Forging furnace advantages and features

Stick style bright annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，the product looks beautiful.，it is an ideal choice for customers to buy Stick style bright annealing furnace。

1、Brief introduction of Stick style bright annealing furnace

Stick style bright annealing furnaceIt is a forging heating device using gas as fuel.，can be customized according to user's needs.。

Stick style bright annealing furnace

2、Structural characteristics of Stick style bright annealing furnace

The Stick style bright annealing furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Stick style bright annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Stick style bright annealing furnace

3、Stick style bright annealing furnace use

The purpose of Stick style bright annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Stick style bright annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Stick style bright annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Stick style bright annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Stick style bright annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Stick style bright annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Stick style bright annealing furnace

4、Advantages of Stick style bright annealing furnace principle

Stick style bright annealing furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is widely used in chemical industry, petroleum, machinery, electron, metallurgy and other industries，the main features are energy saving and environmental protection, Stable and reliable, energy saving and environmental protection, energy-efficient and Easy to control，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。

Stick style bright annealing furnace

5、Stick style bright annealing furnace function

Stick style bright annealing furnacemultifunctional, with functions such as quench, Forging heating, normalizing, Casting heating and heat treatment，the product looks beautiful.，It is mostly used in Metal forging heating, Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Metal forging heating, Improve production efficiency and so on，Easy to maintain,Strong adaptability,Easy to control,Stable and reliable,energy-efficient，is a Stick style bright annealing furnace。

Stick style bright annealing furnace

6、Stick style bright annealing furnace structure composition

The Stick style bright annealing furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. Radiation chamber

The heat load of the main place for Stick style bright annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Stick style bright annealing furnace

Stick style bright annealing furnaceit has the characteristics of Strong adaptability, energy-efficient, Stable and reliable, Easy to control and Easy to maintain，it is widely used in surface treatment, aerospace, shipping, material and Household necessities。