What is a Square steel heating furnace? Forging furnace specifications, models, and parameters

Square steel heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Easy to control,Stable and reliable,energy saving and environmental protection,Easy to maintain,Strong adaptability，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，the product looks beautiful.，It is mostly used in Metal heat treatment, Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency, Metal forging heating and so on。The following is to introduce the Square steel heating furnace:

1、Brief introduction of Square steel heating furnace

Square steel heating furnaceIt is a forging heating device using gas as fuel.，multifunctional, with functions such as temper, anneal, normalizing, Forging heating and hardening and tempering，it has the characteristics of Stable and reliable, Easy to control, Easy to maintain, Strong adaptability and energy-efficient。

Square steel heating furnace

2、Square steel heating furnace characteristics

The Square steel heating furnace features are as follows:

1. Strong adaptability

The Square steel heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Square steel heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Square steel heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Square steel heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Strong adaptability

The Square steel heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Square steel heating furnace

3、Square steel heating furnace display

Square steel heating furnace picture at a glance, showing elegance.。

Square steel heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Square steel heating furnace use

The purpose of Square steel heating furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Square steel heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Square steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Square steel heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Square steel heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Square steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Square steel heating furnace

5、Square steel heating furnace principle

Square steel heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the product looks atmospheric.，can be customized according to user's needs.。

Square steel heating furnace

6、Square steel heating furnace quotation

The Square steel heating furnace price is introduced as follows:

1. Cost input

When the Square steel heating furnace is manufactured, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. regional difference

One-combustion energy saving address:Shandong(Province), the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

5. Brand strength

At present, there are various brands of Square steel heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Square steel heating furnace are different.

Square steel heating furnace

Square steel heating furnaceStructure consists of furnace chamber, Radiation chamber, ventilation system, combustor, ventilation system and so on，Square steel heating furnaceSimple structure and reliable operation.，the main features are energy saving and environmental protection, Stable and reliable, Strong adaptability, Easy to maintain and Easy to control，is a common Square steel heating furnace。