Introduction to Roasting tube annealing furnace, forging furnace advantages, characteristics and principles

Roasting tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，features include Strong adaptability, Easy to maintain, energy saving and environmental protection, Stable and reliable and energy-efficient。The following is to introduce the Roasting tube annealing furnace:

1、Brief introduction of Roasting tube annealing furnace

Roasting tube annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Roasting tube annealing furnace

2、Introduction of advantages of Roasting tube annealing furnace

The advantages of Roasting tube annealing furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Roasting tube annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Intelligent control

The Roasting tube annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Roasting tube annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Roasting tube annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Roasting tube annealing furnace

3、Roasting tube annealing furnace characteristics

The Roasting tube annealing furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Roasting tube annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The Roasting tube annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Strong adaptability

The Roasting tube annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Roasting tube annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Roasting tube annealing furnace

4、Roasting tube annealing furnace structure

The Roasting tube annealing furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Roasting tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Roasting tube annealing furnace

5、Roasting tube annealing furnace application

Roasting tube annealing furnaces have the following purposes.

1. Metal forging heating

The Roasting tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Roasting tube annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Roasting tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Roasting tube annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Roasting tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Roasting tube annealing furnace

6、Roasting tube annealing furnace price

The Roasting tube annealing furnace price is introduced as follows:

1. region

The price of Roasting tube annealing furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a specialized manufacturer of Roasting tube annealing furnace not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Roasting tube annealing furnace price positioning more reasonable, low-cost and economical.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Roasting tube annealing furnace price and service can meet the actual needs of customers.

3. market quotation

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in Roasting tube annealing furnace prices, so this is also the main factor affecting prices.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

5. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Roasting tube annealing furnace

Roasting tube annealing furnaceIt is a forging heating device using gas as fuel.，Commonly used inImprove production efficiency,Metal heat treatment,Energy conservation and environmental protection,Metal forging heating,Metal heat treatment and so on，is a popular Roasting tube annealing furnace。