Introduction to Stick type quenching and tempering heat treatment furnace, introduction to heating furnace advantages and characteristics

Stick type quenching and tempering heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

1、Brief introduction of Stick type quenching and tempering heat treatment furnace

Stick type quenching and tempering heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Stick type quenching and tempering heat treatment furnace

2、Stick type quenching and tempering heat treatment furnace advantage

The advantages of Stick type quenching and tempering heat treatment furnace are as follows:

1. easy to operate

The operation interface of the Stick type quenching and tempering heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stick type quenching and tempering heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Uniform heating

The Stick type quenching and tempering heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Improve product quality

Because the Stick type quenching and tempering heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Stick type quenching and tempering heat treatment furnace

3、Stick type quenching and tempering heat treatment furnace characteristics

The Stick type quenching and tempering heat treatment furnace features are as follows:

1. Efficient heating

The Stick type quenching and tempering heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Stable and reliable

The Stick type quenching and tempering heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Stick type quenching and tempering heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Stick type quenching and tempering heat treatment furnace

4、Stick type quenching and tempering heat treatment furnace structure

The Stick type quenching and tempering heat treatment furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Stick type quenching and tempering heat treatment furnace

5、How much is the Stick type quenching and tempering heat treatment furnace?

The Stick type quenching and tempering heat treatment furnace price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Stick type quenching and tempering heat treatment furnace price and service can meet the actual needs of customers.

2. geographical position

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

3. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Stick type quenching and tempering heat treatment furnace is low.

4. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. market

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

Stick type quenching and tempering heat treatment furnace

6、Company selection skills

Choosing a suitable Stick type quenching and tempering heat treatment furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Stick type quenching and tempering heat treatment furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Stick type quenching and tempering heat treatment furnaceMainly used forEnergy conservation and environmental protection,Metal tempering,Metal melting and casting,Metal heat treatment andMetal heat treatment，it is widely used inwar industry,light industry,Machinery manufacturing,building materials,automobile and other industries。