Introduction to Automatic feeding and unloading heating furnace and Forging furnace advantages and features

Automatic feeding and unloading heating furnaceIt is a forging heating device using gas as fuel.，it has the functions of temper, Forging heating, temper, hardening and tempering and Casting heating，is developed and improved by One-combustion energy saving。

1、Brief introduction of Automatic feeding and unloading heating furnace

Automatic feeding and unloading heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Automatic feeding and unloading heating furnace

2、Automatic feeding and unloading heating furnace principle

Automatic feeding and unloading heating furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the characteristics of Stable and reliable, energy saving and environmental protection, energy-efficient, Strong adaptability and energy-efficient，it is an ideal choice for customers to buy Automatic feeding and unloading heating furnace。

Automatic feeding and unloading heating furnace

3、Automatic feeding and unloading heating furnace characteristics

The Automatic feeding and unloading heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Automatic feeding and unloading heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Automatic feeding and unloading heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Automatic feeding and unloading heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Stable and reliable

The Automatic feeding and unloading heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Automatic feeding and unloading heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Automatic feeding and unloading heating furnace

4、Automatic feeding and unloading heating furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Automatic feeding and unloading heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Automatic feeding and unloading heating furnace

As you can see from the live video.，One-combustion energy saving the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

5、Structural advantages of Automatic feeding and unloading heating furnace

The Automatic feeding and unloading heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Automatic feeding and unloading heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Automatic feeding and unloading heating furnace

6、Automatic feeding and unloading heating furnace price concessions

The Automatic feeding and unloading heating furnace price is introduced as follows:

1. technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. company strength

Our factory is a direct selling manufacturer of Automatic feeding and unloading heating furnace, with independent production and processing facilities, few circulation links and low circulation cost.

4. market demand

In order to build their own brands, some manufacturers deliberately reduce the price of Automatic feeding and unloading heating furnace. The price of competitors will affect the pricing of equipment more or less, and the price may be lower.

5. Parameter size

The same product, even with different specifications and models and different configurations, has different costs, so the price will be different.

Automatic feeding and unloading heating furnace

Automatic feeding and unloading heating furnaceWidely used inMetal melting and casting,Energy conservation and environmental protection,Metal tempering,Metal heat treatment,Improve production efficiency and so on，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Structure consists of ventilation system, convection chamber, Radiation chamber, furnace chamber, convection chamber and so on。