Introduction to Automatic feeding, unloading, forging and heating furnace, introduction to heating furnace advantages and characteristics

Automatic feeding, unloading, forging and heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。The following is to introduce the Automatic feeding, unloading, forging and heating furnace:

1、Brief introduction of Automatic feeding, unloading, forging and heating furnace

Automatic feeding, unloading, forging and heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，energy saving and environmental protection,Stable and reliable,Easy to maintain,Easy to control,Strong adaptability，The overall structural design is simple and novel.，it mainly includes ventilation system, combustor, Radiation chamber, recovery of waste heat and ventilation system，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it can be used in electron, automobile, building materials, pharmacy, heat treatment and other industries。

Automatic feeding, unloading, forging and heating furnace

2、Introduction of Automatic feeding, unloading, forging and heating furnace characteristics

Automatic feeding, unloading, forging and heating furnace has the following characteristics

1. Stable and reliable

The Automatic feeding, unloading, forging and heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic feeding, unloading, forging and heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Automatic feeding, unloading, forging and heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Efficient heating

The Automatic feeding, unloading, forging and heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Automatic feeding, unloading, forging and heating furnace

3、Functional advantages of Automatic feeding, unloading, forging and heating furnace

Automatic feeding, unloading, forging and heating furnaces have the following advantages.

1. Uniform heating

The Automatic feeding, unloading, forging and heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Efficient combustion

The Automatic feeding, unloading, forging and heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic feeding, unloading, forging and heating furnace can significantly reduce energy consumption, thus reducing operating costs.

4. easy to operate

The operation interface of the Automatic feeding, unloading, forging and heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Improve product quality

Because the Automatic feeding, unloading, forging and heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Automatic feeding, unloading, forging and heating furnace

4、Working principle of Automatic feeding, unloading, forging and heating furnace

Automatic feeding, unloading, forging and heating furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Automatic feeding, unloading, forging and heating furnace

5、Automatic feeding, unloading, forging and heating furnace use

The purpose of Automatic feeding, unloading, forging and heating furnace is introduced as follows:

1. Metal forging heating

The Automatic feeding, unloading, forging and heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Automatic feeding, unloading, forging and heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Automatic feeding, unloading, forging and heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Automatic feeding, unloading, forging and heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Automatic feeding, unloading, forging and heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Automatic feeding, unloading, forging and heating furnace

6、Automatic feeding, unloading, forging and heating furnace quotation

The Automatic feeding, unloading, forging and heating furnace price is introduced as follows:

1. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Automatic feeding, unloading, forging and heating furnace has a higher cost performance.

2. Reasonable cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Automatic feeding, unloading, forging and heating furnace will also be reduced.

3. quality

The price of Automatic feeding, unloading, forging and heating furnace is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

4. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Automatic feeding, unloading, forging and heating furnace price and service can meet the actual needs of customers.

5. Self quality

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Automatic feeding, unloading, forging and heating furnace will vary greatly. One-combustion energy saving attaches great importance to the quality of products, and the formulation of prices is also reasonable.

Automatic feeding, unloading, forging and heating furnace

Automatic feeding, unloading, forging and heating furnaceis a Automatic feeding, unloading, forging and heating furnace，widely used in petroleum, metallurgy, war industry, shipping, Household necessities and other fields，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。