Introduction to Automatic feeding and discharging forging furnace, Forging furnace advantages, characteristics and principles

Automatic feeding and discharging forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.。The following is to introduce the Automatic feeding and discharging forging furnace:

1、Brief introduction of Automatic feeding and discharging forging furnace

Automatic feeding and discharging forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Automatic feeding and discharging forging furnace，It has a wide range of uses, including Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal melting and casting and Metal heat treatment，can be customized according to user's needs.。

Automatic feeding and discharging forging furnace

2、Automatic feeding and discharging forging furnace use

The purpose of Automatic feeding and discharging forging furnace is introduced as follows:

1. Energy conservation and environmental protection

The Automatic feeding and discharging forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Automatic feeding and discharging forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Automatic feeding and discharging forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic feeding and discharging forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Automatic feeding and discharging forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Automatic feeding and discharging forging furnace

3、Automatic feeding and discharging forging furnace principle

Automatic feeding and discharging forging furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a popular Automatic feeding and discharging forging furnace，it has the functions of heat treatment, temper, Forging heating, heat treatment and Casting heating。

Automatic feeding and discharging forging furnace

4、Automatic feeding and discharging forging furnace structure

The Automatic feeding and discharging forging furnace structure is introduced as follows:

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Automatic feeding and discharging forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic feeding and discharging forging furnace

5、Automatic feeding and discharging forging furnace function

Automatic feeding and discharging forging furnacemultifunctional, with functions such as hardening and tempering, normalizing, quench, temper and anneal。

Automatic feeding and discharging forging furnace

Automatic feeding and discharging forging furnaceis a common Automatic feeding and discharging forging furnace，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，features include Easy to maintain, energy saving and environmental protection, Stable and reliable, Easy to control and energy-efficient。