Introduction to Stainless steel tube heating furnace, introduction to Forging furnace advantages and characteristics

Stainless steel tube heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main structure includes recovery of waste heat, convection chamber, furnace chamber, combustor, combustor and so on，Stainless steel tube heating furnaceSimple structure and advanced technology.，multifunctional, with functions such as normalizing, Forging heating, temper, hardening and tempering and quench，features include Strong adaptability, energy-efficient, Easy to control, Easy to maintain and energy saving and environmental protection，was developed and designed by One-combustion energy saving。

1、Brief introduction of Stainless steel tube heating furnace

Stainless steel tube heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Stainless steel tube heating furnace

2、Structural advantages of Stainless steel tube heating furnace

The Stainless steel tube heating furnace has the following structure

1. Radiation chamber

The heat load of the main place for Stainless steel tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Stainless steel tube heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Stainless steel tube heating furnace

3、Functional advantages of Stainless steel tube heating furnace

Stainless steel tube heating furnaces have the following advantages.

1. Extend the service life of equipment

The Stainless steel tube heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stainless steel tube heating furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Intelligent control

The Stainless steel tube heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Wide application range

The Stainless steel tube heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Stainless steel tube heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Stainless steel tube heating furnace

4、Stainless steel tube heating furnace characteristics

The Stainless steel tube heating furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Stainless steel tube heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Stable and reliable

The Stainless steel tube heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Efficient heating

The Stainless steel tube heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Stainless steel tube heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stainless steel tube heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Stainless steel tube heating furnace

5、Stainless steel tube heating furnace application

Stainless steel tube heating furnaces have the following purposes.

1. Energy conservation and environmental protection

The Stainless steel tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Stainless steel tube heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Improve production efficiency

The Stainless steel tube heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Stainless steel tube heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Stainless steel tube heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Stainless steel tube heating furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of Forging furnace, which produces Stainless steel tube heating furnace with It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Stainless steel tube heating furnaceis a popular Stainless steel tube heating furnace，Structure consists of convection chamber, ventilation system, Radiation chamber, recovery of waste heat, furnace chamber and so on，it has the functions of Casting heating, anneal, heat treatment, normalizing and anneal。