Introduction to Fully automatic feeding forging heating furnace and forging furnace working principle

Fully automatic feeding forging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used in petroleum, war industry, building materials, pharmacy, electron and other fields。

1、Brief introduction of Fully automatic feeding forging heating furnace

Fully automatic feeding forging heating furnaceIt is a forging heating device using gas as fuel.，the product looks beautiful.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

Fully automatic feeding forging heating furnace

2、Fully automatic feeding forging heating furnace structure

The Fully automatic feeding forging heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. furnace chamber

A space for holding metallic materials for heating.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Fully automatic feeding forging heating furnace

3、Fully automatic feeding forging heating furnace working site

On-site aerial photography of Fully automatic feeding forging heating furnace。

Fully automatic feeding forging heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a product series that integrates Metal melting and casting, Metal melting and casting, Metal heat treatment, Metal tempering and Metal forging heating。

4、Fully automatic feeding forging heating furnace characteristics

The Fully automatic feeding forging heating furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Fully automatic feeding forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Fully automatic feeding forging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Fully automatic feeding forging heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Fully automatic feeding forging heating furnace

5、How much is the Fully automatic feeding forging heating furnace?

The Fully automatic feeding forging heating furnace price is introduced as follows:

1. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Fully automatic feeding forging heating furnace price and service can meet the actual needs of customers.

3. Low cost of raw materials

When the Fully automatic feeding forging heating furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

4. market competition

When the market demand for Fully automatic feeding forging heating furnace is relatively high, manufacturers will raise the price in order to get more profits. On the contrary, when the market demand for this product is low, manufacturers will lower the price in order to sell the remaining products as soon as possible.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Fully automatic feeding forging heating furnace have more or less differences in price.

Fully automatic feeding forging heating furnace

6、Company selection

Choosing a suitable Fully automatic feeding forging heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Fully automatic feeding forging heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Fully automatic feeding forging heating furnaceNatural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，usually used in material, Machinery manufacturing, machinery, Machinery manufacturing, metallurgy and other fields。