What is a Denitrification of tail gas and flue gas from roasting furnace? Introduction to the principle of SCR denitration structure

Denitrification of tail gas and flue gas from roasting furnacethe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，features include Strong adaptability, Stable operation, Economically feasible, High denitration efficiency and Environment friendly，It has a wide range of uses, including environmental protection, Meet the requirements of environmental protection, Promote sustainable development, Promote sustainable development and environmental protection，is a common Denitrification of tail gas and flue gas from roasting furnace，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of tail gas and flue gas from roasting furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of tail gas and flue gas from roasting furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of tail gas and flue gas from roasting furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of tail gas and flue gas from roasting furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification of tail gas and flue gas from roasting furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of tail gas and flue gas from roasting furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of tail gas and flue gas from roasting furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.。

1、Brief introduction of Denitrification of tail gas and flue gas from roasting furnace

Denitrification of tail gas and flue gas from roasting furnaceit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，The structural design is more advanced and reasonable.，the main structure includes Catalyst supply system, Catalyst reactor, control system, Flue gas mixing and distribution system, Temperature control and monitoring system and so on，support customization。

Denitrification of tail gas and flue gas from roasting furnace

2、Denitrification of tail gas and flue gas from roasting furnace advantage

The advantages of Denitrification of tail gas and flue gas from roasting furnace are as follows:

1. Intelligent control and convenience of operation

The Denitrification of tail gas and flue gas from roasting furnace has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Denitrification of tail gas and flue gas from roasting furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

2. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification of tail gas and flue gas from roasting furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification of tail gas and flue gas from roasting furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

3. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Denitrification of tail gas and flue gas from roasting furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

4. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Denitrification of tail gas and flue gas from roasting furnace technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of tail gas and flue gas from roasting furnace technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

5. Mature and stable technology

Denitrification of tail gas and flue gas from roasting furnace technology has been developed and applied for many years, and the technology is mature and stable. The Denitrification of tail gas and flue gas from roasting furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification of tail gas and flue gas from roasting furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

Denitrification of tail gas and flue gas from roasting furnace

3、Denitrification of tail gas and flue gas from roasting furnace introduction video

The following is the live video of Denitrification of tail gas and flue gas from roasting furnace designed and produced by One-combustion energy saving for users, from which we can see the The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification of tail gas and flue gas from roasting furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of tail gas and flue gas from roasting furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification of tail gas and flue gas from roasting furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification of tail gas and flue gas from roasting furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification of tail gas and flue gas from roasting furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions. of One-combustion energy savingDenitrification of tail gas and flue gas from roasting furnace.。

Denitrification of tail gas and flue gas from roasting furnace

As you can see from the live video.，One-combustion energy saving Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

4、Denitrification of tail gas and flue gas from roasting furnace characteristics

The Denitrification of tail gas and flue gas from roasting furnace features are as follows:

1. Environmental protection

The final products of Denitrification of tail gas and flue gas from roasting furnace technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

2. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

3. Small secondary pollution

The by-products produced in the Denitrification of tail gas and flue gas from roasting furnace opening process are nitrogen and water vapor, and there is no secondary pollution problem.

4. Strong adaptability

Denitrification of tail gas and flue gas from roasting furnace technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

5. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

Denitrification of tail gas and flue gas from roasting furnace

5、Denitrification of tail gas and flue gas from roasting furnace real beat

One-combustion energy saving Denitrification of tail gas and flue gas from roasting furnacethe product looks atmospheric., the picture is taken.。

Denitrification of tail gas and flue gas from roasting furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Company preferential activities

Denitrification of tail gas and flue gas from roasting furnace is a new type of SCR denitration introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for building materials and other industries. Now consult One-combustion energy savingProduction and processing的Denitrification of tail gas and flue gas from roasting furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Denitrification of tail gas and flue gas from roasting furnacethe product looks beautiful.，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。