Introduction to Steel chain stainless steel annealing furnace and Forging furnace working principle

Steel chain stainless steel annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is mainly composed of ventilation system, recovery of waste heat, furnace chamber, combustor and convection chamber，This productThe overall structural design is simple and novel.，it has the characteristics of Strong adaptability, Easy to control, Stable and reliable, Easy to maintain and energy saving and environmental protection，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。

1、Brief introduction of Steel chain stainless steel annealing furnace

Steel chain stainless steel annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Steel chain stainless steel annealing furnace

2、Steel chain stainless steel annealing furnace use

The purpose of Steel chain stainless steel annealing furnace is introduced as follows:

1. Energy conservation and environmental protection

The Steel chain stainless steel annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Steel chain stainless steel annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Steel chain stainless steel annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The Steel chain stainless steel annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal heat treatment

In addition to forging heating, Steel chain stainless steel annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Steel chain stainless steel annealing furnace

3、Steel chain stainless steel annealing furnace customer scene picture

One-combustion energy saving Steel chain stainless steel annealing furnacethe product looks atmospheric., the picture is taken.。

Steel chain stainless steel annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Steel chain stainless steel annealing furnace structure composition

The Steel chain stainless steel annealing furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Steel chain stainless steel annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Steel chain stainless steel annealing furnace

5、Steel chain stainless steel annealing furnace HD real shot

The following is the live video of Steel chain stainless steel annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes. of One-combustion energy savingSteel chain stainless steel annealing furnace.。

Steel chain stainless steel annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of Forging heating, quench, heat treatment, Casting heating and hardening and tempering。

6、Introduction of Steel chain stainless steel annealing furnace characteristics

Steel chain stainless steel annealing furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Steel chain stainless steel annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Steel chain stainless steel annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Steel chain stainless steel annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Steel chain stainless steel annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Stable and reliable

The Steel chain stainless steel annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Steel chain stainless steel annealing furnace

Steel chain stainless steel annealing furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。