Introduction to Chain track continuous annealing furnace and forging furnace structure principle

Chain track continuous annealing furnaceIt is a forging heating device using gas as fuel.，it is widely used inchemical industry,surface treatment,electron,material,Machinery manufacturing and other industries，Widely used inMetal tempering,Improve production efficiency,Metal melting and casting,Metal forging heating,Improve production efficiency and so on，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，the main structure includes ventilation system, Radiation chamber, furnace chamber, recovery of waste heat, convection chamber and so on，Chain track continuous annealing furnaceSimple structure and reliable operation.。The following is to introduce the Chain track continuous annealing furnace:

1、Brief introduction of Chain track continuous annealing furnace

Chain track continuous annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are Strong adaptability, Stable and reliable, energy saving and environmental protection, Easy to control and Easy to maintain，the product looks beautiful.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，super quality and competitive price。

Chain track continuous annealing furnace

2、Structural characteristics of Chain track continuous annealing furnace

The Chain track continuous annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Chain track continuous annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Chain track continuous annealing furnace

3、Chain track continuous annealing furnace use

The purpose of Chain track continuous annealing furnace is introduced as follows:

1. Metal forging heating

The Chain track continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal forging heating

The Chain track continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Chain track continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain track continuous annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Chain track continuous annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Chain track continuous annealing furnace

4、Chain track continuous annealing furnace work site real shot

The following pictures can be used for reference by new and old customers.。

Chain track continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、How much is the Chain track continuous annealing furnace?

The Chain track continuous annealing furnace price is introduced as follows:

1. product quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Chain track continuous annealing furnace.

2. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

3. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Chain track continuous annealing furnace price is affected by the configuration, and the price varies.

4. market demand

If there is a large demand for Chain track continuous annealing furnace in the market, the price of Chain track continuous annealing furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

5. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Chain track continuous annealing furnace price and service can meet the actual needs of customers.

Chain track continuous annealing furnace

6、One-combustion energy saving after-sales service

Customers should not only consider quality, performance and price factors when purchasing Chain track continuous annealing furnace, but also consider the after-sales service of manufacturers. Good after-sales service can reduce many unnecessary troubles for customers. One-combustion energy saving Factory always adheres to the service attitude of "customer is God", implements high-standard and high-quality after-sales service attitude, conducts regular customer satisfaction surveys, and strictly supervises the quality of after-sales service, so as to relieve customers' purchasing concerns and make purchasing customers completely worry-free.。

One-combustion energy saving

Chain track continuous annealing furnaceit has the functions of quench, heat treatment, hardening and tempering, Casting heating and normalizing，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.。