Introduction to Natural gas regenerative trolley heating furnace, forging furnace advantages, characteristics and principles

Natural gas regenerative trolley heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks beautiful.，features include Easy to maintain, energy-efficient, Strong adaptability, energy saving and environmental protection and Easy to control。The following is to introduce the Natural gas regenerative trolley heating furnace:

1、Brief introduction of Natural gas regenerative trolley heating furnace

Natural gas regenerative trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Natural gas regenerative trolley heating furnace

2、Natural gas regenerative trolley heating furnace characteristics

The Natural gas regenerative trolley heating furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Natural gas regenerative trolley heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Natural gas regenerative trolley heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Natural gas regenerative trolley heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Natural gas regenerative trolley heating furnace

3、Natural gas regenerative trolley heating furnace picture

The Natural gas regenerative trolley heating furnace has a beautiful appearance and atmosphere for our customers' reference.。

Natural gas regenerative trolley heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Natural gas regenerative trolley heating furnace structure composition

The Natural gas regenerative trolley heating furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. Radiation chamber

The heat load of the main place for Natural gas regenerative trolley heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Natural gas regenerative trolley heating furnace

5、Natural gas regenerative trolley heating furnace function

Natural gas regenerative trolley heating furnacemultifunctional, with functions such as quench, hardening and tempering, anneal, normalizing and Casting heating，features include Stable and reliable, energy saving and environmental protection, Stable and reliable, Strong adaptability and Easy to maintain。

Natural gas regenerative trolley heating furnace

Natural gas regenerative trolley heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，widely used inelectron,heat treatment,automobile,petroleum,pharmacy and other industries，it has the functions of hardening and tempering, Forging heating, anneal, heat treatment and quench。