What is a Natural gas regenerative trolley forging furnace? Introduction to the advantages and characteristics of the Forging furnace

Natural gas regenerative trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is widely used in surface treatment, aerospace, war industry, shipping, light industry and other industries，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，is a Natural gas regenerative trolley forging furnace。The following is to introduce the Natural gas regenerative trolley forging furnace:

1、Brief introduction of Natural gas regenerative trolley forging furnace

Natural gas regenerative trolley forging furnaceIt is a forging heating device using gas as fuel.，The overall structural design is relatively simple and compact.，it is mainly composed of combustor, ventilation system, furnace chamber, ventilation system and Radiation chamber，Widely used in Metal forging heating, Metal tempering, Energy conservation and environmental protection, Metal heat treatment and Metal melting and casting，was developed and designed by One-combustion energy saving。

Natural gas regenerative trolley forging furnace

2、Natural gas regenerative trolley forging furnace explanation video

You can buy Natural gas regenerative trolley forging furnace according to your needs and show you Natural gas regenerative trolley forging furnace videos.。

Natural gas regenerative trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

3、Structural characteristics of Natural gas regenerative trolley forging furnace

The Natural gas regenerative trolley forging furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Natural gas regenerative trolley forging furnace

4、Introduction of Natural gas regenerative trolley forging furnace characteristics

Natural gas regenerative trolley forging furnace has the following characteristics

1. Stable and reliable

The Natural gas regenerative trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Natural gas regenerative trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Natural gas regenerative trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Natural gas regenerative trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Natural gas regenerative trolley forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Natural gas regenerative trolley forging furnace

5、How much is the Natural gas regenerative trolley forging furnace?

The Natural gas regenerative trolley forging furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Different regions

Geographical location also has a certain influence on the formulation of price, because there is a close relationship between geographical location and transportation cost. Generally, the price of places with superior geographical location will be more fair, which is lower than that of those remote cities. One-combustion energy saving address:Jinan, where the traffic is very developed and convenient, provides a series of conveniences for the distribution of products to a great extent.

3. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. Configuration difference

The difference in Natural gas regenerative trolley forging furnace configuration will affect the product cost price. The higher the configuration, the higher the product cost price and the higher the overall selling price of the product. It is suggested that customers should compare whether the configuration is in line with the quotation when purchasing products, and compare more companies.

5. Brand strength

At present, there are various brands of Natural gas regenerative trolley forging furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Natural gas regenerative trolley forging furnace are different.

Natural gas regenerative trolley forging furnace

6、High-definition map of One-combustion energy saving workshop

The finished products of the Natural gas regenerative trolley forging furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Natural gas regenerative trolley forging furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Natural gas regenerative trolley forging furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，It is mostly used in Metal tempering, Metal forging heating, Improve production efficiency, Energy conservation and environmental protection, Metal tempering, Metal melting and casting and so on，It is a forging heating device using gas as fuel.。