Introduction to Quenching trolley furnace, how much is the price of the Forging furnace?

Quenching trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.，It has a wide range of uses, and is often used inImprove production efficiency,Energy conservation and environmental protection,Metal melting and casting,Metal heat treatment,Improve production efficiency and so on，The price is relatively low.，modern technology。

1、Brief introduction of Quenching trolley furnace

Quenching trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The overall structural design is simple, diverse and beautiful.，it is mainly composed of recovery of waste heat, combustor, convection chamber, combustor and furnace chamber，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，is a popular Quenching trolley furnace，Strong adaptability,energy saving and environmental protection,Easy to control,Easy to maintain,Easy to maintain。

Quenching trolley furnace

2、Quenching trolley furnace advantage

The advantages of Quenching trolley furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Wide application range

The Quenching trolley furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Improve product quality

Because the Quenching trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Efficient combustion

The Quenching trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Quenching trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Quenching trolley furnace

3、Quenching trolley furnace characteristics

The Quenching trolley furnace features are as follows:

1. Easy to maintain

The structural design of the Quenching trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Quenching trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

The combustion system and ventilation system of the Quenching trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Quenching trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Quenching trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Quenching trolley furnace

4、Working principle of Quenching trolley furnace

Quenching trolley furnacethe principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main structure includes ventilation system, convection chamber, Radiation chamber, recovery of waste heat, ventilation system and so on，widely used in building materials, electron, Machinery manufacturing, shipping, metallurgy and other fields，the product looks beautiful.，was developed and designed by One-combustion energy saving。

Quenching trolley furnace

5、Quenching trolley furnace working site

Speak directly with facts on the spot。

Quenching trolley furnace

As you can see from the live video.，One-combustion energy saving it has the functions of anneal, temper, heat treatment, normalizing and Casting heating。

6、Quenching trolley furnace characteristics

The Quenching trolley furnace features are as follows:

1. Efficient heating

The Quenching trolley furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Quenching trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Quenching trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Quenching trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Quenching trolley furnace

Quenching trolley furnacefeatures include Easy to control, Strong adaptability, energy-efficient, Stable and reliable and energy saving and environmental protection，widely used in material, machinery, material, petroleum, Household necessities and other fields，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。