What is a Regenerative burner box type heating furnace? forging furnace specifications, models, and parameters

Regenerative burner box type heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，has been favored by more and more customers.。The following is to introduce the Regenerative burner box type heating furnace:

1、Brief introduction of Regenerative burner box type heating furnace

Regenerative burner box type heating furnaceIt is a forging heating device using gas as fuel.，it has the characteristics of Strong adaptability, Easy to control, energy saving and environmental protection, Easy to maintain and Stable and reliable，super quality and competitive price。

Regenerative burner box type heating furnace

2、Regenerative burner box type heating furnace use

The purpose of Regenerative burner box type heating furnace is introduced as follows:

1. Metal forging heating

The Regenerative burner box type heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Regenerative burner box type heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner box type heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Regenerative burner box type heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner box type heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative burner box type heating furnace

3、Regenerative burner box type heating furnace application

Regenerative burner box type heating furnaces have the following purposes.

1. Improve production efficiency

The Regenerative burner box type heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Regenerative burner box type heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Regenerative burner box type heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner box type heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Regenerative burner box type heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative burner box type heating furnace

4、Regenerative burner box type heating furnace structure

The Regenerative burner box type heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Regenerative burner box type heating furnace

5、Regenerative burner box type heating furnace advantage

The advantages of Regenerative burner box type heating furnace are as follows:

1. Improve product quality

Because the Regenerative burner box type heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Wide application range

The Regenerative burner box type heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Intelligent control

The Regenerative burner box type heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Efficient combustion

The Regenerative burner box type heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative burner box type heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Regenerative burner box type heating furnace

6、How much is the Regenerative burner box type heating furnace?

The Regenerative burner box type heating furnace price is introduced as follows:

1. Company size

Although there are many manufacturers of products in Jinan, Shandong province, there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

2. Service factor

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative burner box type heating furnace price and service can meet the actual needs of customers.

3. market factors

This factor is directly related to the economic dynamics. When the economic dynamics are unstable, the relationship between supply and demand will be unbalanced, which will lead to a very large fluctuation in the price of Regenerative burner box type heating furnace. Therefore, we should also be aware of the relationship between this factor and the price during the price setting process.

4. Cost input

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Regenerative burner box type heating furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

5. Brand strength

At present, there are various brands of Regenerative burner box type heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Regenerative burner box type heating furnace are different.

Regenerative burner box type heating furnace

Regenerative burner box type heating furnaceit is widely used inaerospace,light industry,machinery,building materials,heat treatment and other industries，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the characteristics of energy-efficient, Strong adaptability, energy-efficient, Stable and reliable and Easy to control。