What is a Regenerative burner through furnace? Introduction to the advantages and characteristics of the Forging furnace

Regenerative burner through furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a common Regenerative burner through furnace，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，the product looks atmospheric.，It has the functions of Improve production efficiency, Energy conservation and environmental protection, Improve production efficiency, Metal forging heating and Metal tempering。

1、Brief introduction of Regenerative burner through furnace

Regenerative burner through furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is widely used inaerospace,heat treatment,metallurgy,Machinery manufacturing,petroleum and other industries，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is an ideal choice for customers to buy Regenerative burner through furnace。

Regenerative burner through furnace

2、Regenerative burner through furnace HD real shot

One-combustion energy saving Regenerative burner through furnace, product manufacturer, product features, is the ideal choice for new and old customers.。

Regenerative burner through furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Regenerative burner through furnace use

The purpose of Regenerative burner through furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Regenerative burner through furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner through furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Regenerative burner through furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Regenerative burner through furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative burner through furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative burner through furnace

4、Regenerative burner through furnace characteristics

The Regenerative burner through furnace features are as follows:

1. Efficient heating

The Regenerative burner through furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Stable and reliable

The Regenerative burner through furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Regenerative burner through furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Regenerative burner through furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Regenerative burner through furnace

5、Regenerative burner through furnace video

You can buy Regenerative burner through furnace according to your needs and show you product videos.。

Regenerative burner through furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It can be used for Metal heat treatment, Metal melting and casting, Metal forging heating, Metal tempering, Metal heat treatment, Metal melting and casting and so on。

6、Regenerative burner through furnace application

Regenerative burner through furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Regenerative burner through furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Regenerative burner through furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The Regenerative burner through furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The Regenerative burner through furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Regenerative burner through furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative burner through furnace

Regenerative burner through furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。