Introduction to Split type quenching heat treatment furnace and Forging furnace advantages and features

Split type quenching heat treatment furnaceIt is a forging heating device using gas as fuel.。The following is to introduce the Split type quenching heat treatment furnace:

1、Brief introduction of Split type quenching heat treatment furnace

Split type quenching heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The price is more affordable，modern technology。

Split type quenching heat treatment furnace

2、Split type quenching heat treatment furnace use

The purpose of Split type quenching heat treatment furnace is introduced as follows:

1. Metal forging heating

The Split type quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Split type quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Split type quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Split type quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type quenching heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Split type quenching heat treatment furnace

3、Split type quenching heat treatment furnace advantage

The advantages of Split type quenching heat treatment furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Intelligent control

The Split type quenching heat treatment furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Uniform heating

The Split type quenching heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. easy to operate

The operation interface of the Split type quenching heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

5. Wide application range

The Split type quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Split type quenching heat treatment furnace

4、Split type quenching heat treatment furnace characteristics

The Split type quenching heat treatment furnace features are as follows:

1. Stable and reliable

The Split type quenching heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to control

The combustion system and ventilation system of the Split type quenching heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Split type quenching heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Efficient heating

The Split type quenching heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Split type quenching heat treatment furnace

5、Split type quenching heat treatment furnace structure

The Split type quenching heat treatment furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Radiation chamber

The heat load of the main place for Split type quenching heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Split type quenching heat treatment furnace

6、Split type quenching heat treatment furnace price

The Split type quenching heat treatment furnace price is introduced as follows:

1. Manufacturer scale

Our company's expected profit value of Split type quenching heat treatment furnace is relatively low, and adopts the sales policy of small profits but quick turnover, so the price positioning of Split type quenching heat treatment furnace is relatively low.

2. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

3. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Split type quenching heat treatment furnace.

4. Model size

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

5. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

Split type quenching heat treatment furnace

Split type quenching heat treatment furnaceit is mainly composed of recovery of waste heat, ventilation system, convection chamber, furnace chamber and Radiation chamber，This productThe overall structural design is relatively simple and compact.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。