What is a Double trolley forging furnace? How much is the price of the Forging furnace?

Double trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The price is relatively low.。The following is to introduce the Double trolley forging furnace:

1、Brief introduction of Double trolley forging furnace

Double trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Double trolley forging furnace

2、Double trolley forging furnace characteristics

The Double trolley forging furnace features are as follows:

1. Efficient heating

The Double trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Strong adaptability

The Double trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Double trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Double trolley forging furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Double trolley forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Double trolley forging furnace

3、Double trolley forging furnace advantage

The advantages of Double trolley forging furnace are as follows:

1. easy to operate

The operation interface of the Double trolley forging furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the Double trolley forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Improve product quality

Because the Double trolley forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The Double trolley forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Double trolley forging furnace

4、Double trolley forging furnace video

On-site aerial photography of Double trolley forging furnace。

Double trolley forging furnace

As you can see from the live video.，One-combustion energy saving Widely used in Metal melting and casting, Improve production efficiency, Metal heat treatment, Energy conservation and environmental protection and Metal forging heating。

5、Double trolley forging furnace structure

The Double trolley forging furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Double trolley forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Double trolley forging furnace

6、Structural advantages of Double trolley forging furnace

The Double trolley forging furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. furnace chamber

A space for holding metallic materials for heating.

Double trolley forging furnace

Double trolley forging furnacefeatures include Strong adaptability, energy saving and environmental protection, Easy to control, Easy to maintain and Stable and reliable，the product looks atmospheric.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。