Introduction to Pre embedded annealing industrial furnace and forging furnace working principle

Pre embedded annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Pre embedded annealing industrial furnace

Pre embedded annealing industrial furnaceIt is a forging heating device using gas as fuel.，is a popular Pre embedded annealing industrial furnace，it has the structure of Radiation chamber, ventilation system, combustor, ventilation system and recovery of waste heat，This productThe structural design is simple, novel and special.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，Easy to maintain,energy saving and environmental protection,Strong adaptability,energy-efficient,Easy to control。

Pre embedded annealing industrial furnace

2、Video analysis of Pre embedded annealing industrial furnace

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Pre embedded annealing industrial furnacet operation, and helps customers to deeply understand the Pre embedded annealing industrial furnace production process and production site, and gain favorable comments and recognition from customers.。

Pre embedded annealing industrial furnace

As you can see from the live video.，One-combustion energy saving The overall structural design is relatively simple，it is mainly composed of recovery of waste heat, ventilation system, Radiation chamber, convection chamber and ventilation system。

3、Working principle of Pre embedded annealing industrial furnace

Pre embedded annealing industrial furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Pre embedded annealing industrial furnace。

Pre embedded annealing industrial furnace

4、Pre embedded annealing industrial furnace structure composition

The Pre embedded annealing industrial furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Pre embedded annealing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Pre embedded annealing industrial furnace

5、Pre embedded annealing industrial furnace quotation

The Pre embedded annealing industrial furnace price is introduced as follows:

1. Proper management mode

One-combustion energy saving Pre embedded annealing industrial furnace manufacturer is a manufacturer specializing in the production of different products, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Pre embedded annealing industrial furnace price is also low.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

4. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Pre embedded annealing industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Pre embedded annealing industrial furnace price can meet the purchasing needs of customers.

5. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

Pre embedded annealing industrial furnace

6、One-combustion energy saving introduced

One-combustion energy saving is a strong and professional Pre embedded annealing industrial furnace manufacturer, with advanced Pre embedded annealing industrial furnace production technology and rich production experience. It will not only provide users with Pre embedded annealing industrial furnace with Easy to maintain, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Pre embedded annealing industrial furnaceit has the functions of normalizing, quench, temper, hardening and tempering and anneal，It is an efficient, energy-saving and environment-friendly metal heating device.。