Introduction to Pre embedded annealing furnace, heating furnace specifications, model parameters

Pre embedded annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，support customization。The following is to introduce the Pre embedded annealing furnace:

1、Brief introduction of Pre embedded annealing furnace

Pre embedded annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Mainly used forImprove production efficiency,Metal forging heating,Energy conservation and environmental protection,Metal heat treatment andMetal tempering，multifunctional, with functions such as anneal, heat treatment, Forging heating, hardening and tempering and Casting heating，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，super quality and competitive price。

Pre embedded annealing furnace

2、Pre embedded annealing furnace use

The purpose of Pre embedded annealing furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Pre embedded annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Pre embedded annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The Pre embedded annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Pre embedded annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Pre embedded annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Pre embedded annealing furnace

3、Pre embedded annealing furnace HD picture

the product looks atmospheric., advanced technology, complete specifications and models。

Pre embedded annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Pre embedded annealing furnace performance advantage

The advantages of Pre embedded annealing furnace are as follows:

1. easy to operate

The operation interface of the Pre embedded annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Improve product quality

Because the Pre embedded annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Pre embedded annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Uniform heating

The Pre embedded annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Pre embedded annealing furnace

5、Pre embedded annealing furnace characteristics

The Pre embedded annealing furnace features are as follows:

1. Easy to maintain

The structural design of the Pre embedded annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Pre embedded annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Efficient heating

The Pre embedded annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to control

The combustion system and ventilation system of the Pre embedded annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Stable and reliable

The Pre embedded annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Pre embedded annealing furnace

6、Real-time shooting in One-combustion energy saving's production workshop

The finished products of the Pre embedded annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Pre embedded annealing furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Pre embedded annealing furnaceis a popular Pre embedded annealing furnace，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，it has the characteristics of Strong adaptability, Stable and reliable, Easy to control, energy-efficient and Strong adaptability。