Introduction to Trolley type steel pipe annealing furnace, Forging furnace advantages, characteristics and principles

Trolley type steel pipe annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。

1、Brief introduction of Trolley type steel pipe annealing furnace

Trolley type steel pipe annealing furnaceIt is a forging heating device using gas as fuel.。

Trolley type steel pipe annealing furnace

2、Trolley type steel pipe annealing furnace work site real shot

One-combustion energy saving Trolley type steel pipe annealing furnace came in many pictures, which made everyone feast their eyes.。

Trolley type steel pipe annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Trolley type steel pipe annealing furnace function

Trolley type steel pipe annealing furnacemultifunctional, with functions such as Forging heating, hardening and tempering, anneal, normalizing and Casting heating，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It has a wide range of uses, and is often used inMetal tempering,Improve production efficiency,Metal melting and casting,Energy conservation and environmental protection,Metal forging heating and so on。

Trolley type steel pipe annealing furnace

4、Working principle of Trolley type steel pipe annealing furnace

Trolley type steel pipe annealing furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it can be used in material, machinery, war industry, shipping, automobile and other industries，Structure consists of ventilation system, combustor, ventilation system, convection chamber, recovery of waste heat and so on，productSimple structure and advanced technology.。

Trolley type steel pipe annealing furnace

5、Trolley type steel pipe annealing furnace use

The purpose of Trolley type steel pipe annealing furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Trolley type steel pipe annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Trolley type steel pipe annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Trolley type steel pipe annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Improve production efficiency

The Trolley type steel pipe annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Trolley type steel pipe annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Trolley type steel pipe annealing furnace

6、Trolley type steel pipe annealing furnace structure

The Trolley type steel pipe annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Radiation chamber

The heat load of the main place for Trolley type steel pipe annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Trolley type steel pipe annealing furnace

Trolley type steel pipe annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Stable and reliable,energy saving and environmental protection,Easy to maintain,energy-efficient,Strong adaptability，it has the structure of ventilation system, convection chamber, Radiation chamber, ventilation system and combustor。