Introduction to Multi tube continuous annealing furnace, forging furnace specifications, model parameters

Multi tube continuous annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Multi tube continuous annealing furnace

Multi tube continuous annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It is a product series that integrates Metal forging heating, Metal tempering, Metal heat treatment, Energy conservation and environmental protection and Energy conservation and environmental protection，it has been widely used in automobile, surface treatment, chemical industry, aerospace, shipping and other industries，the advantage is Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it has the structure of ventilation system, furnace chamber, combustor, ventilation system and convection chamber。

Multi tube continuous annealing furnace

2、Multi tube continuous annealing furnace application

Multi tube continuous annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi tube continuous annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal tempering

By properly heating and cooling the metal material, the Multi tube continuous annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Multi tube continuous annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Multi tube continuous annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Multi tube continuous annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Multi tube continuous annealing furnace

3、Multi tube continuous annealing furnace structure composition

The Multi tube continuous annealing furnace has the following structure

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. Radiation chamber

The heat load of the main place for Multi tube continuous annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Multi tube continuous annealing furnace

4、Multi tube continuous annealing furnace HD real shot

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Multi tube continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of advantages of Multi tube continuous annealing furnace

Multi tube continuous annealing furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Multiple fuel options

Although the Multi tube continuous annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. Uniform heating

The Multi tube continuous annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Extend the service life of equipment

The Multi tube continuous annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Wide application range

The Multi tube continuous annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Multi tube continuous annealing furnace

6、Multi tube continuous annealing furnace real shot picture

The Multi tube continuous annealing furnace has a beautiful appearance and atmosphere for our customers' reference.。

Multi tube continuous annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Multi tube continuous annealing furnacemultifunctional, with functions such as quench, normalizing, temper, heat treatment and quench，it has the characteristics of energy-efficient, energy saving and environmental protection, Stable and reliable, energy-efficient and energy saving and environmental protection。