Introduction to Stepping beam quenching heating furnace, advantages, characteristics and principles of forging furnace

Stepping beam quenching heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。The following is to introduce the Stepping beam quenching heating furnace:

1、Brief introduction of Stepping beam quenching heating furnace

Stepping beam quenching heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Commonly used inMetal forging heating,Metal tempering,Metal heat treatment,Metal melting and casting,Energy conservation and environmental protection and so on，is carefully developed by One-combustion energy saving combined with advanced technology。

Stepping beam quenching heating furnace

2、Introduction of Stepping beam quenching heating furnace characteristics

Stepping beam quenching heating furnace has the following characteristics

1. Stable and reliable

The Stepping beam quenching heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Stepping beam quenching heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Easy to control

The combustion system and ventilation system of the Stepping beam quenching heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Stepping beam quenching heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Stepping beam quenching heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Stepping beam quenching heating furnace

3、Stepping beam quenching heating furnace HD picture real shot

High-definition picture display of Stepping beam quenching heating furnace, excellent material selection, reliable quality and trustworthy.。

Stepping beam quenching heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Working principle of Stepping beam quenching heating furnace

Stepping beam quenching heating furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，Cheap and high quality。

Stepping beam quenching heating furnace

5、Stepping beam quenching heating furnace quotation

The Stepping beam quenching heating furnace price is introduced as follows:

1. market demand

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the Stepping beam quenching heating furnace will be very high.

2. Model specification

There are many specifications and models of Stepping beam quenching heating furnace, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

3. geographical position

One-combustion energy saving located in Shandong(Province)., the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

4. model

The same product, with different specifications and models, requires different materials and accessories when manufacturing. Moreover, the products with different specifications and models have different performance, and the manufacturers have different production costs, so the prices of products with different specifications and models are also different.

5. Brand strength

At present, there are various brands of Stepping beam quenching heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Stepping beam quenching heating furnace are different.

Stepping beam quenching heating furnace

6、One-combustion energy saving workshop real shot

The finished products of the Stepping beam quenching heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Stepping beam quenching heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Stepping beam quenching heating furnaceIt has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it has the characteristics of energy-efficient, energy saving and environmental protection, Easy to maintain, Easy to control and energy-efficient，the product looks atmospheric.。