Introduction to Pressure type annealing furnace, introduction to Forging furnace function advantages and characteristics

Pressure type annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Pressure type annealing furnace。The following is to introduce the Pressure type annealing furnace:

1、Brief introduction of Pressure type annealing furnace

Pressure type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it mainly includes ventilation system, furnace chamber, Radiation chamber, combustor and ventilation system，the product looks beautiful.。

Pressure type annealing furnace

2、Advantages of Pressure type annealing furnace principle

Pressure type annealing furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has been widely used in electron, shipping, pharmacy, heat treatment, material and other industries，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it is mainly composed of convection chamber, recovery of waste heat, ventilation system, furnace chamber and combustor，Pressure type annealing furnaceThe structural design is simple, novel and special.，has been favored by more and more customers.。

Pressure type annealing furnace

3、Pressure type annealing furnace characteristics

The Pressure type annealing furnace features are as follows:

1. Stable and reliable

The Pressure type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Pressure type annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Easy to control

The combustion system and ventilation system of the Pressure type annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Pressure type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Pressure type annealing furnace

4、Structural advantages of Pressure type annealing furnace

The Pressure type annealing furnace has the following structure

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Radiation chamber

The heat load of the main place for Pressure type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Pressure type annealing furnace

5、Pressure type annealing furnace introduction video

Speak directly with facts on the spot。

Pressure type annealing furnace

As you can see from the live video.，One-combustion energy saving the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

6、company introduction

One-combustion energy saving has many years of experience in Pressure type annealing furnace production, and is a professional Pressure type annealing furnace manufacturer. With favorable Pressure type annealing furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Pressure type annealing furnace manufacturer in Jinan.。

One-combustion energy saving

Pressure type annealing furnaceStrong adaptability,Easy to maintain,energy-efficient,Strong adaptability,Easy to maintain，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。