Introduction to Stick type spheroidization heat treatment furnace, heating furnace advantages, characteristics and principles

Stick type spheroidization heat treatment furnaceIt is a forging heating device using gas as fuel.，it has the functions of normalizing, quench, Forging heating, heat treatment and Casting heating，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a kind of high quality and low price Stick type spheroidization heat treatment furnace，it is an ideal choice for customers to buy Stick type spheroidization heat treatment furnace。The following is to introduce the Stick type spheroidization heat treatment furnace:

1、Brief introduction of Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，it is usually composed of Radiation chamber, convection chamber, ventilation system, furnace chamber and recovery of waste heat。

Stick type spheroidization heat treatment furnace

2、Advantages of Stick type spheroidization heat treatment furnace principle

Stick type spheroidization heat treatment furnaceat the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Widely used inMetal tempering,Improve production efficiency,Metal melting and casting,Metal heat treatment,Metal forging heating and so on，super quality and competitive price。

Stick type spheroidization heat treatment furnace

3、Introduction of Stick type spheroidization heat treatment furnace characteristics

Stick type spheroidization heat treatment furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Stick type spheroidization heat treatment furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Stick type spheroidization heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Stable and reliable

The Stick type spheroidization heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Stick type spheroidization heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Strong adaptability

The Stick type spheroidization heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Stick type spheroidization heat treatment furnace

4、Stick type spheroidization heat treatment furnace explanation video

The following is the live video of Stick type spheroidization heat treatment furnace designed and produced by One-combustion energy saving for users, from which we can see the Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time. of One-combustion energy savingStick type spheroidization heat treatment furnace.。

Stick type spheroidization heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the functions of normalizing, anneal, temper, quench and hardening and tempering。

5、Stick type spheroidization heat treatment furnace function

Stick type spheroidization heat treatment furnacemultifunctional, with functions such as Forging heating, temper, quench, anneal and Casting heating，the product looks atmospheric.，It has a wide range of uses, including Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering and Metal heat treatment，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Stick type spheroidization heat treatment furnace

Stick type spheroidization heat treatment furnacethe advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，widely used inwar industry,electron,petroleum,Machinery manufacturing,building materials and other industries，is a common Stick type spheroidization heat treatment furnace。