Introduction to End in end out step in/out furnace and heating furnace structure principle

End in end out step in/out furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is mainly composed of combustor, furnace chamber, Radiation chamber, ventilation system and recovery of waste heat，This End in end out step in/out furnaceSimple structure and advanced technology.。The following is to introduce the End in end out step in/out furnace:

1、Brief introduction of End in end out step in/out furnace

End in end out step in/out furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

End in end out step in/out furnace

2、End in end out step in/out furnace structure composition

The End in end out step in/out furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. Radiation chamber

The heat load of the main place for End in end out step in/out furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

End in end out step in/out furnace

3、End in end out step in/out furnace real shot picture

High-definition pictures of End in end out step in/out furnace of different specifications and models,the product looks atmospheric., reliable in quality and trustworthy.。

End in end out step in/out furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Advantages of End in end out step in/out furnace principle

End in end out step in/out furnaceat runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Mainly used forMetal tempering,Metal heat treatment,Energy conservation and environmental protection,Energy conservation and environmental protection andMetal heat treatment，it is an ideal choice for customers to buy End in end out step in/out furnace。

End in end out step in/out furnace

5、End in end out step in/out furnace HD real shot

On-site aerial photography of End in end out step in/out furnace。

End in end out step in/out furnace

As you can see from the live video.，One-combustion energy saving generally, it is composed of furnace chamber, combustor, ventilation system, recovery of waste heat, Radiation chamber and other major components。

6、End in end out step in/out furnace price concessions

The End in end out step in/out furnace price is introduced as follows:

1. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. mass discrepancy

One-combustion energy saving attaches great importance to the quality of products, which can be reflected in the manufacturing process of End in end out step in/out furnace and the handling of details. Therefore, there is also a close relationship between quality and price. The price of high-quality products will naturally be high, and vice versa.

3. company strength

There are many End in end out step in/out furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

4. market competition

Market change is one of the factors that affect the price range greatly. Market change is unstable, but there are certain rules to follow. Market change is caused by other factors, such as economic instability, competition among manufacturers and too big difference between supply and demand. These factors are the core reasons that cause the market to fluctuate greatly, and then it will have a bad impact on prices.

5. Different regions

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

End in end out step in/out furnace

End in end out step in/out furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it has the functions of anneal, Forging heating, Casting heating, normalizing and hardening and tempering。