Introduction to Pressure type annealing industrial furnace and heating furnace structure principle
Pressure type annealing industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.,it has the functions of quench, normalizing, anneal, hardening and tempering and heat treatment,at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.,widely used in electron, Machinery manufacturing, building materials, war industry, petroleum and other fields,It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。The following is to introduce the Pressure type annealing industrial furnace:
1、Brief introduction of Pressure type annealing industrial furnace
Pressure type annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.,the main features are energy saving and environmental protection, Stable and reliable, Easy to control, energy-efficient and Strong adaptability,the product looks atmospheric.。
Pressure type annealing industrial furnace
2、Pressure type annealing industrial furnace function
Pressure type annealing industrial furnacemultifunctional, with functions such as normalizing, quench, Forging heating, temper and anneal。
Pressure type annealing industrial furnace
3、Pressure type annealing industrial furnace use
The purpose of Pressure type annealing industrial furnace is introduced as follows:
- Metal heat treatment
- Metal forging heating
- Metal tempering
- Energy conservation and environmental protection
- Metal tempering
In addition to forging heating, Pressure type annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.
The Pressure type annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.
By properly heating and cooling the metal material, the Pressure type annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.
The Pressure type annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.
By properly heating and cooling the metal material, the Pressure type annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.
Pressure type annealing industrial furnace
4、Pressure type annealing industrial furnace HD picture real shot
High-definition picture display of Pressure type annealing industrial furnace, excellent material selection, reliable quality and trustworthy.。
Pressure type annealing industrial furnace
Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。
5、Functional advantages of Pressure type annealing industrial furnace
Pressure type annealing industrial furnaces have the following advantages.
- Reduce operating costs
- easy to operate
- Rapid temperature rise
- Improve product quality
- Extend the service life of equipment
The efficient combustion and waste heat recovery system of the Pressure type annealing industrial furnace can significantly reduce energy consumption, thus reducing operating costs.
The operation interface of the Pressure type annealing industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.
The Pressure type annealing industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.
Because the Pressure type annealing industrial furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.
The Pressure type annealing industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.
Pressure type annealing industrial furnace
6、Pressure type annealing industrial furnace price consultation
The Pressure type annealing industrial furnace price is introduced as follows:
- product function
- mass discrepancy
- geographical position
- Manufacturer's strength
- Quality advantages and disadvantages
The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.
As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.
The price of Pressure type annealing industrial furnace in Shandong(Province) is much lower than that in other regions, and One-combustion energy saving is a professional manufacturer in Jinan, Shandong province not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Pressure type annealing industrial furnace price positioning more reasonable, low-cost and economical.
The nature of the manufacturer can also greatly affect the price of the Pressure type annealing industrial furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.
The selling price of excellent quality products is also high, so users should also consider the quality and price of products comprehensively when purchasing products, so as to buy products with high cost performance.
Pressure type annealing industrial furnace
Pressure type annealing industrial furnaceit is widely used in light industry, machinery, chemical industry, metallurgy and surface treatment,it has the functions of Casting heating, hardening and tempering, heat treatment, quench and normalizing,Simple structure and reliable operation.,the main structure includes ventilation system, convection chamber, ventilation system, Radiation chamber and recovery of waste heat。
Related recommendation
-
Introduction to Heating furnace denitrification, introduction to SCR denitration system function advantages and characteristics
2025-5-27 -
What is a Natural gas storage type natural gas trolley furnace? Introduction to the advantages and characteristics of forging furnace functions
2025-5-27 -
What is a SCR low-temperature denitrification system? Introduction to the advantages and characteristics of SCR denitration system functions
2025-5-27 -
Introduction to Metal Heat Treatment Natural Gas Trolley Furnace, heating furnace specifications, model parameters
2025-5-27 -
台车式退火炉
2023-06-14 -
Introduction to Side in and side out heating furnace and heating furnace structure principle
2025-5-27 -
Introduction to Denitrification equipment for forging industry, introduction to SCR flue gas denitrification function advantages and characteristics
2025-5-27 -
What is a Gas walking furnace? Introduction to the Working Principle of forging furnace
2025-5-27 -
What is a Pipe heating furnace? Introduction to the advantages, characteristics, and principles of the forging furnace
2025-5-27 -
What is a High temperature bright annealing industrial furnace? How much is the price of the heating furnace?
2025-5-27