Introduction to multi-zone reheating furnace, forging furnace specifications, model parameters

multi-zone reheating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of normalizing, quench, Forging heating, quench and temper，structure mainly includes: ventilation system, Radiation chamber, convection chamber, ventilation system, combustor and so on，Strong adaptability,Stable and reliable,Easy to control,Stable and reliable,Easy to control，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

1、Brief introduction of multi-zone reheating furnace

multi-zone reheating furnaceIt is a forging heating device using gas as fuel.，be of high quality。

multi-zone reheating furnace

2、multi-zone reheating furnace characteristics

The multi-zone reheating furnace features are as follows:

1. Strong adaptability

The multi-zone reheating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the multi-zone reheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The multi-zone reheating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to maintain

The structural design of the multi-zone reheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The multi-zone reheating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

multi-zone reheating furnace

3、multi-zone reheating furnace HD real shot

Provide high-definition multi-zone reheating furnace real shot, a variety of specifications and models for customers to visit.。

multi-zone reheating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、multi-zone reheating furnace use

The purpose of multi-zone reheating furnace is introduced as follows:

1. Energy conservation and environmental protection

The multi-zone reheating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The multi-zone reheating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The multi-zone reheating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The multi-zone reheating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, multi-zone reheating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

multi-zone reheating furnace

5、Working principle of multi-zone reheating furnace

multi-zone reheating furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

multi-zone reheating furnace

multi-zone reheating furnaceis a multi-zone reheating furnace，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。