What is a End in side out forging heating furnace? Introduction to the principle of forging furnace structure

End in side out forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of temper, Forging heating, hardening and tempering, Forging heating and heat treatment，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，the product looks beautiful.。

1、Brief introduction of End in side out forging heating furnace

End in side out forging heating furnaceIt is a forging heating device using gas as fuel.，It has the functions of Metal forging heating, Improve production efficiency, Energy conservation and environmental protection, Metal heat treatment and Energy conservation and environmental protection，Strong adaptability,Easy to control,energy-efficient,Stable and reliable,energy saving and environmental protection，The structural design is simple, novel and special.，the main structure includes furnace chamber, ventilation system, ventilation system, recovery of waste heat, combustor and so on，was developed and designed by One-combustion energy saving。

End in side out forging heating furnace

2、End in side out forging heating furnace use

The purpose of End in side out forging heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the End in side out forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The End in side out forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of End in side out forging heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The End in side out forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The End in side out forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

End in side out forging heating furnace

3、End in side out forging heating furnace characteristics

The End in side out forging heating furnace features are as follows:

1. Easy to maintain

The structural design of the End in side out forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The End in side out forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Strong adaptability

The End in side out forging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

End in side out forging heating furnace

4、End in side out forging heating furnace display

One-combustion energy saving End in side out forging heating furnace HD picture, panoramic shooting。

End in side out forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、End in side out forging heating furnace advantage

The advantages of End in side out forging heating furnace are as follows:

1. Intelligent control

The End in side out forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Improve product quality

Because the End in side out forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Multiple fuel options

Although the End in side out forging heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the End in side out forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

End in side out forging heating furnace

6、One-combustion energy saving workshop pictures

The finished products of the End in side out forging heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the End in side out forging heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

End in side out forging heating furnaceit is widely used inmaterial,surface treatment,Household necessities,pharmacy,war industry and other industries，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。