Introduction to End in side out forging furnace, introduction to Forging furnace advantages and characteristics

End in side out forging furnaceIt is a forging heating device using gas as fuel.，features include energy saving and environmental protection, Easy to maintain, energy-efficient, Easy to maintain and Easy to control，it is an ideal choice for customers to buy End in side out forging furnace。

1、Brief introduction of End in side out forging furnace

End in side out forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

End in side out forging furnace

2、End in side out forging furnace principle

End in side out forging furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the structure of furnace chamber, Radiation chamber, ventilation system, furnace chamber and convection chamber。

End in side out forging furnace

3、End in side out forging furnace performance advantage

End in side out forging furnaces have the following advantages.

1. Efficient combustion

The End in side out forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Efficient combustion

The End in side out forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Extend the service life of equipment

The End in side out forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Rapid temperature rise

The End in side out forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

End in side out forging furnace

4、End in side out forging furnace application

End in side out forging furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of End in side out forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, End in side out forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The End in side out forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal heat treatment

In addition to forging heating, End in side out forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The End in side out forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

End in side out forging furnace

5、Structural advantages of End in side out forging furnace

The End in side out forging furnace has the following structure

1. Radiation chamber

The heat load of the main place for End in side out forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for End in side out forging furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

End in side out forging furnace

6、Brief introduction of End in side out forging furnace

End in side out forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It has a wide range of uses, including Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Metal heat treatment and Metal tempering，it is widely used in war industry, light industry, Household necessities, shipping and material，The overall structural design is simple, diverse and beautiful.，it is mainly composed of ventilation system, combustor, recovery of waste heat, Radiation chamber and convection chamber，customizable。

End in side out forging furnace

End in side out forging furnacethe product looks atmospheric.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。