Introduction to Automatic entry and exit forging heating furnace and forging furnace advantages and features

Automatic entry and exit forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as quench, temper, Forging heating, anneal and heat treatment，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is widely used inheat treatment,electron,automobile,surface treatment,metallurgy and other industries，is a common Automatic entry and exit forging heating furnace。

1、Brief introduction of Automatic entry and exit forging heating furnace

Automatic entry and exit forging heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，has been favored by more and more customers.。

Automatic entry and exit forging heating furnace

2、Automatic entry and exit forging heating furnace video detail

The following is the live video of Automatic entry and exit forging heating furnace designed and produced by One-combustion energy saving for users, from which we can see the It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. of One-combustion energy savingAutomatic entry and exit forging heating furnace.。

Automatic entry and exit forging heating furnace

As you can see from the live video.，One-combustion energy saving It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

3、Structural advantages of Automatic entry and exit forging heating furnace

The Automatic entry and exit forging heating furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Automatic entry and exit forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic entry and exit forging heating furnace

4、Automatic entry and exit forging heating furnace customer scene picture

One-combustion energy saving Automatic entry and exit forging heating furnace is completely upgraded, savoring the beauty of details.。

Automatic entry and exit forging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Automatic entry and exit forging heating furnace characteristics

Automatic entry and exit forging heating furnace has the following characteristics

1. Stable and reliable

The Automatic entry and exit forging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Automatic entry and exit forging heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic entry and exit forging heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Stable and reliable

The Automatic entry and exit forging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Automatic entry and exit forging heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Automatic entry and exit forging heating furnace

6、One-combustion energy saving's after-sales service

One-combustion energy saving has perfect and reasonable after-sales service, which can solve customers' problems in a short time and reduce customers' losses. One-combustion energy saving can provide strong protection for customers in the later stage.。

One-combustion energy saving

Automatic entry and exit forging heating furnaceit has the characteristics of Strong adaptability, Stable and reliable, Strong adaptability, energy-efficient and Easy to control，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。