Introduction to Automatic lifting forging heating furnace, forging furnace advantages, characteristics and principles

Automatic lifting forging heating furnaceIt is a forging heating device using gas as fuel.，the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it has been widely used in light industry, automobile, machinery, electron, pharmacy and other industries。

1、Brief introduction of Automatic lifting forging heating furnace

Automatic lifting forging heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It can be used for Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal melting and casting, Energy conservation and environmental protection, Metal heat treatment and so on，it mainly includes ventilation system, recovery of waste heat, ventilation system, convection chamber and Radiation chamber，the product looks atmospheric.。

Automatic lifting forging heating furnace

2、Video analysis of Automatic lifting forging heating furnace

On-site aerial photography of Automatic lifting forging heating furnace。

Automatic lifting forging heating furnace

As you can see from the live video.，One-combustion energy saving the main features are Strong adaptability, Stable and reliable, Easy to control, Stable and reliable and Strong adaptability。

3、Automatic lifting forging heating furnace use

The purpose of Automatic lifting forging heating furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Automatic lifting forging heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Automatic lifting forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Automatic lifting forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Automatic lifting forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal forging heating

The Automatic lifting forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Automatic lifting forging heating furnace

4、Automatic lifting forging heating furnace function

Automatic lifting forging heating furnacemultifunctional, with functions such as hardening and tempering, heat treatment, hardening and tempering, temper and normalizing。

Automatic lifting forging heating furnace

5、Automatic lifting forging heating furnace structure

The Automatic lifting forging heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Radiation chamber

The heat load of the main place for Automatic lifting forging heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. furnace chamber

A space for holding metallic materials for heating.

Automatic lifting forging heating furnace

Automatic lifting forging heating furnaceusually used in petroleum, material, Household necessities, light industry, building materials and other fields，multifunctional, with functions such as anneal, Casting heating, Forging heating, quench and heat treatment。