Brief introduction of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as normalizing, anneal, heat treatment, quench and Casting heating，It can be used for Metal forging heating, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering, Metal heat treatment and so on，it is an ideal choice for customers to buy Pull rod annealing industrial furnace。

1、Brief introduction of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the product looks beautiful.，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a popular Pull rod annealing industrial furnace。

Pull rod annealing industrial furnace

2、Structural advantages of Pull rod annealing industrial furnace

The Pull rod annealing industrial furnace has the following structure

1. Radiation chamber

The heat load of the main place for Pull rod annealing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Pull rod annealing industrial furnace

3、Pull rod annealing industrial furnace field real shot

On-site aerial photography of Pull rod annealing industrial furnace。

Pull rod annealing industrial furnace

As you can see from the live video.，One-combustion energy saving it has the functions of Forging heating, temper, normalizing, anneal and hardening and tempering。

4、Functional advantages of Pull rod annealing industrial furnace

Pull rod annealing industrial furnaces have the following advantages.

1. Extend the service life of equipment

The Pull rod annealing industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Efficient combustion

The Pull rod annealing industrial furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Wide application range

The Pull rod annealing industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Multiple fuel options

Although the Pull rod annealing industrial furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. easy to operate

The operation interface of the Pull rod annealing industrial furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Pull rod annealing industrial furnace

5、Pull rod annealing industrial furnace principle

Pull rod annealing industrial furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，energy-efficient,Easy to maintain,Stable and reliable,energy saving and environmental protection,Strong adaptability，the product looks beautiful.，is designed by One-combustion energy saving with advanced technology。

Pull rod annealing industrial furnace

6、Pull rod annealing industrial furnace price concessions

The Pull rod annealing industrial furnace price is introduced as follows:

1. sales mode

One-combustion energy saving Pull rod annealing industrial furnace manufacturer is a large professional factory, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Pull rod annealing industrial furnace price is also low.

2. market factors

Some external factors, such as market conditions, economic situation, industry rules, supply-demand relationship, etc., will also lead to certain fluctuations in Pull rod annealing industrial furnace prices, so this is also the main factor affecting prices.

3. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Pull rod annealing industrial furnace price and service can meet the actual needs of customers.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

Pull rod annealing industrial furnace

Pull rod annealing industrial furnaceThe overall structural design is simple, diverse and beautiful.，it is mainly composed of convection chamber, ventilation system, Radiation chamber, recovery of waste heat and furnace chamber，it has been widely used in shipping, surface treatment, automobile, pharmacy, metallurgy and other industries，the product looks atmospheric.。