Introduction to Low temperature catalytic denitrification equipment, SCR flue gas denitrification specifications, model parameters

Low temperature catalytic denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，it is usually composed of Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system, Catalyst supply system and control system，Low temperature catalytic denitrification equipmentThe overall structural design is simple and novel.，is developed and improved by One-combustion energy saving。

1、Brief introduction of Low temperature catalytic denitrification equipment

Low temperature catalytic denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.。

Low temperature catalytic denitrification equipment

2、On-site real shot of Low temperature catalytic denitrification equipment

One-combustion energy saving Low temperature catalytic denitrification equipment HD picture, panoramic shooting。

Low temperature catalytic denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Low temperature catalytic denitrification equipment characteristics

Low temperature catalytic denitrification equipment has the following characteristics

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Mature technology

After years of development and application, Low temperature catalytic denitrification equipment technology is very mature and has a wide application prospect.

3. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

Low temperature catalytic denitrification equipment

4、Functional advantages of Low temperature catalytic denitrification equipment

Low temperature catalytic denitrification equipments have the following advantages.

1. Wide applicability

Low temperature catalytic denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

2. Intelligent control and convenience of operation

The Low temperature catalytic denitrification equipment has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Low temperature catalytic denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Environmental friendliness

The by-products produced by Low temperature catalytic denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalytic denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

4. Mature and stable technology

Low temperature catalytic denitrification equipment technology has been developed and applied for many years, and the technology is mature and stable. The Low temperature catalytic denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

5. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature catalytic denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalytic denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

Low temperature catalytic denitrification equipment

5、Working principle of Low temperature catalytic denitrification equipment

Low temperature catalytic denitrification equipmentat runtime,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is a common Low temperature catalytic denitrification equipment，it has the characteristics of Efficient denitration, Environment friendly, Good selectivity, Stable operation and Stable operation，it is mainly composed of Catalyst reactor, Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system and control system，be loved by our customers.。

Low temperature catalytic denitrification equipment

Low temperature catalytic denitrification equipmentmultifunctional, with functions such as Improve energy efficiency, Improve working conditions, Promote sustainable development, environmental protection and Improve energy efficiency，It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalytic denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalytic denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalytic denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalytic denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalytic denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalytic denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.。