Introduction to Quenching heat treatment industrial furnace, introduction to Forging furnace function advantages and characteristics

Quenching heat treatment industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a common Quenching heat treatment industrial furnace，the product looks atmospheric.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

1、Brief introduction of Quenching heat treatment industrial furnace

Quenching heat treatment industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is an ideal choice for customers to buy Quenching heat treatment industrial furnace。

Quenching heat treatment industrial furnace

2、Quenching heat treatment industrial furnace characteristics

The Quenching heat treatment industrial furnace features are as follows:

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Quenching heat treatment industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Strong adaptability

The Quenching heat treatment industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Efficient heating

The Quenching heat treatment industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Strong adaptability

The Quenching heat treatment industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Quenching heat treatment industrial furnace

3、Working principle of Quenching heat treatment industrial furnace

Quenching heat treatment industrial furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It has a wide range of uses, including Energy conservation and environmental protection, Metal tempering, Metal forging heating, Improve production efficiency and Metal heat treatment，features include energy-efficient, Stable and reliable, Strong adaptability, Easy to control and Easy to maintain，is designed by One-combustion energy saving with advanced technology。

Quenching heat treatment industrial furnace

4、Introduction of Quenching heat treatment industrial furnace characteristics

Quenching heat treatment industrial furnace has the following characteristics

1. Stable and reliable

The Quenching heat treatment industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

The combustion system and ventilation system of the Quenching heat treatment industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Quenching heat treatment industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Quenching heat treatment industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Quenching heat treatment industrial furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Quenching heat treatment industrial furnace

5、On-site real shot of Quenching heat treatment industrial furnace

The finished products of the Quenching heat treatment industrial furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Quenching heat treatment industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Quenching heat treatment industrial furnace price consultation

The Quenching heat treatment industrial furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. raw material

The quality of material selection is one of the main factors that directly affect the Quenching heat treatment industrial furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Quenching heat treatment industrial furnace have more or less differences in price.

4. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Quenching heat treatment industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Quenching heat treatment industrial furnace price can meet the purchasing needs of customers.

Quenching heat treatment industrial furnace

Quenching heat treatment industrial furnaceAdopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It can be used for Metal forging heating, Metal melting and casting, Metal heat treatment, Metal tempering, Energy conservation and environmental protection, Improve production efficiency and so on，multifunctional, with functions such as Forging heating, Casting heating, temper, Forging heating and heat treatment。