Introduction to SCR low-temperature flue gas denitrification system, how much is the price of the SCR denitration?

SCR low-temperature flue gas denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，is a SCR low-temperature flue gas denitrification system，The structural design is simple, novel and special.，the main structure includes Temperature control and monitoring system, control system, Catalyst supply system, Flue gas mixing and distribution system, Catalyst reactor and so on。

1、Brief introduction of SCR low-temperature flue gas denitrification system

SCR low-temperature flue gas denitrification systemthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，be of high quality。

SCR low-temperature flue gas denitrification system

2、SCR low-temperature flue gas denitrification system performance advantage

The advantages of SCR low-temperature flue gas denitrification system are as follows:

1. Mature and stable technology

SCR low-temperature flue gas denitrification system technology has been developed and applied for many years, and the technology is mature and stable. The SCR low-temperature flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low-temperature flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

2. Mature and stable technology

SCR low-temperature flue gas denitrification system technology has been developed and applied for many years, and the technology is mature and stable. The SCR low-temperature flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low-temperature flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the SCR low-temperature flue gas denitrification system technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low-temperature flue gas denitrification system technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

4. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low-temperature flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low-temperature flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

5. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the SCR low-temperature flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

SCR low-temperature flue gas denitrification system

3、SCR low-temperature flue gas denitrification system characteristics

The SCR low-temperature flue gas denitrification system features are as follows:

1. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

2. Environmental protection

The final products of SCR low-temperature flue gas denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

3. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

4. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

5. High denitration efficiency

The denitration efficiency of SCR low-temperature flue gas denitrification system technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

SCR low-temperature flue gas denitrification system

4、SCR low-temperature flue gas denitrification system introduction video

On-site aerial photography of SCR low-temperature flue gas denitrification system。

SCR low-temperature flue gas denitrification system

As you can see from the live video.，One-combustion energy saving it is mainly composed of control system, Temperature control and monitoring system, Flue gas mixing and distribution system, Catalyst reactor and Catalyst supply system，SCR low-temperature flue gas denitrification systemThe structural design is more advanced and reasonable.。

5、Structural advantages of SCR low-temperature flue gas denitrification system

The SCR low-temperature flue gas denitrification system has the following structure

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

3. Temperature control and monitoring

It is used to monitor and control the temperature of the reactor to ensure that the chemical reaction is carried out in the optimal temperature range.

4. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

SCR low-temperature flue gas denitrification system

6、Brief introduction of SCR low-temperature flue gas denitrification system

SCR low-temperature flue gas denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，multifunctional, with functions such as environmental protection, Improve working conditions, Improve energy efficiency, Promote sustainable development and environmental protection，it is an ideal choice for customers to buy SCR low-temperature flue gas denitrification system。

SCR low-temperature flue gas denitrification system

SCR low-temperature flue gas denitrification systemit has the functions of Improve energy efficiency, environmental protection, Improve working conditions, Promote sustainable development and Improve energy efficiency，that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the product looks beautiful.。