Introduction to SCR catalytic oxidation denitrification equipment, introduction to SCR flue gas denitrification advantages and characteristics

SCR catalytic oxidation denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，was developed and designed by One-combustion energy saving。The following is to introduce the SCR catalytic oxidation denitrification equipment:

1、Brief introduction of SCR catalytic oxidation denitrification equipment

SCR catalytic oxidation denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，It is mostly used in Improve product quality, environmental protection, Flue gas denitrification, Promote sustainable development, Improve product quality, Meet the requirements of environmental protection and so on，is a kind of high quality and low price SCR catalytic oxidation denitrification equipment，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR catalytic oxidation denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR catalytic oxidation denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR catalytic oxidation denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR catalytic oxidation denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR catalytic oxidation denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR catalytic oxidation denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，the product looks beautiful.。

SCR catalytic oxidation denitrification equipment

2、SCR catalytic oxidation denitrification equipment function

SCR catalytic oxidation denitrification equipmentit has the functions of Improve energy efficiency, Promote sustainable development, Improve working conditions, environmental protection and Improve energy efficiency，widely used inbuilding materials,cement plant,iron and steel plant,building materials,Gas power plant and other industries，is a popular SCR catalytic oxidation denitrification equipment，it is an ideal choice for customers to buy SCR catalytic oxidation denitrification equipment。

SCR catalytic oxidation denitrification equipment

3、Working principle of SCR catalytic oxidation denitrification equipment

SCR catalytic oxidation denitrification equipmentAmmonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，usually used in coal-fired power station, metallurgy, cement plant, iron and steel plant, coal-fired power station and other fields，Mainly used forPromote sustainable development,Flue gas denitrification,environmental protection,Flue gas denitrification andMeet the requirements of environmental protection，is carefully developed by One-combustion energy saving combined with advanced technology。

SCR catalytic oxidation denitrification equipment

4、SCR catalytic oxidation denitrification equipment HD real shot

The finished products of the SCR catalytic oxidation denitrification equipment factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

SCR catalytic oxidation denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Structural advantages of SCR catalytic oxidation denitrification equipment

The SCR catalytic oxidation denitrification equipment has the following structure

1. Temperature control and monitoring

The temperature in the catalyst reactor is maintained within the optimal reaction temperature range through the temperature control and monitoring system.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. control system

The whole SCR catalytic oxidation denitrification equipment is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

SCR catalytic oxidation denitrification equipment

6、SCR catalytic oxidation denitrification equipment price concessions

The SCR catalytic oxidation denitrification equipment price is introduced as follows:

1. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving SCR catalytic oxidation denitrification equipment manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the SCR catalytic oxidation denitrification equipment price can meet the purchasing needs of customers.

2. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

3. regional difference

One-combustion energy savingShandong(Province), the transportation is convenient, and the corresponding cost of transporting SCR catalytic oxidation denitrification equipment is low, which reduces the cost of selling SCR catalytic oxidation denitrification equipment by manufacturers, and the price will also decrease.

4. Company size

There are many SCR catalytic oxidation denitrification equipment manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

5. market supply and demand

The difference between the supply and demand of manufacturers and customers will also affect the SCR catalytic oxidation denitrification equipment price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the SCR catalytic oxidation denitrification equipment price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the SCR catalytic oxidation denitrification equipment price will decrease.

SCR catalytic oxidation denitrification equipment

SCR catalytic oxidation denitrification equipmentThere are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR catalytic oxidation denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The SCR catalytic oxidation denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR catalytic oxidation denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR catalytic oxidation denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR catalytic oxidation denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR catalytic oxidation denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，in the course of work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。