Introduction to Heat treatment well type annealing furnace, introduction to Forging furnace advantages and characteristics

Heat treatment well type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，it has the characteristics of energy saving and environmental protection, Easy to control, Stable and reliable, Easy to control and energy-efficient。The following is to introduce the Heat treatment well type annealing furnace:

1、Brief introduction of Heat treatment well type annealing furnace

Heat treatment well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It can be used for Metal heat treatment, Metal tempering, Metal melting and casting, Improve production efficiency, Energy conservation and environmental protection, Metal forging heating and so on，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，it can be used in machinery, heat treatment, shipping, metallurgy, electron and other industries，it is mainly composed of combustor, convection chamber, recovery of waste heat, Radiation chamber and ventilation system。

Heat treatment well type annealing furnace

2、Heat treatment well type annealing furnace structure composition

The Heat treatment well type annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Heat treatment well type annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Heat treatment well type annealing furnace

3、Introduction of Heat treatment well type annealing furnace characteristics

Heat treatment well type annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Heat treatment well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Heat treatment well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Heat treatment well type annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Easy to maintain

The structural design of the Heat treatment well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Heat treatment well type annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Heat treatment well type annealing furnace

4、Introduction of advantages of Heat treatment well type annealing furnace

Heat treatment well type annealing furnaces have the following advantages.

1. Improve product quality

Because the Heat treatment well type annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Heat treatment well type annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

3. Rapid temperature rise

The Heat treatment well type annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Multiple fuel options

Although the Heat treatment well type annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Intelligent control

The Heat treatment well type annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Heat treatment well type annealing furnace

5、Heat treatment well type annealing furnace application

Heat treatment well type annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Heat treatment well type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Heat treatment well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Heat treatment well type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Heat treatment well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Heat treatment well type annealing furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a strong and professional Heat treatment well type annealing furnace manufacturer, with advanced Heat treatment well type annealing furnace production technology and rich production experience. It will not only provide users with Heat treatment well type annealing furnace with Strong adaptability, but also provide users with complete pre-sales, in-sales and after-sales services for the benefit of users. Welcome new and old users to visit and buy.。

One-combustion energy saving

Heat treatment well type annealing furnacethe product looks atmospheric.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a popular Heat treatment well type annealing furnace。