Introduction to Pit type quenching furnace, forging furnace advantages, characteristics and principles

Pit type quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the characteristics of Strong adaptability, Easy to control, Stable and reliable, energy-efficient and Easy to maintain，the product looks beautiful.。

1、Brief introduction of Pit type quenching furnace

Pit type quenching furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，was developed and designed by One-combustion energy saving。

Pit type quenching furnace

2、Pit type quenching furnace field real shot

Its appearance design is exquisite and elegant. The following is a high-definition picture of the factory for One-combustion energy saving's customers to choose and buy. You can contact online customer service at any time, make an appointment to visit the factory and take a shuttle bus from One-combustion energy saving.。

Pit type quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of advantages of Pit type quenching furnace

Pit type quenching furnaces have the following advantages.

1. Wide application range

The Pit type quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Improve product quality

Because the Pit type quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Pit type quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Intelligent control

The Pit type quenching furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Rapid temperature rise

The Pit type quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Pit type quenching furnace

4、Introduction of Pit type quenching furnace characteristics

Pit type quenching furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Pit type quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Strong adaptability

The Pit type quenching furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Stable and reliable

The Pit type quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to maintain

The structural design of the Pit type quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Pit type quenching furnace

5、How much is the Pit type quenching furnace?

The Pit type quenching furnace price is introduced as follows:

1. market supply and demand

With the increasingly fierce competition of Pit type quenching furnace, market factors have a certain influence on the price of Pit type quenching furnace. When the demand in the market increases and the supply remains unchanged, the price will rise. On the contrary, the price will fall. When there is an increase in supply and the demand remains unchanged, the price will rise, on the contrary, the price will fall.

2. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

3. Reasonable cost

The cost of manufacturing Pit type quenching furnace varies from manufacturer to manufacturer. The higher the cost of manufacturing products, the higher the product price will be. On the other hand, the lower the production cost, the lower the product price, but the quality of products with high production cost is guaranteed, which can reduce the maintenance cost of customers.

4. Company size

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

5. Proper management mode

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

Pit type quenching furnace

6、Company selection skills

Choosing a suitable Pit type quenching furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Pit type quenching furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Pit type quenching furnaceit is widely used in petroleum, chemical industry, aerospace, material and Machinery manufacturing，features include energy saving and environmental protection, Strong adaptability, Easy to control, Easy to maintain and energy-efficient。