Introduction to Well type smelting furnace and forging furnace advantages and features

Well type smelting furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as quench, hardening and tempering, anneal, Casting heating and normalizing，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，it is an ideal choice for customers to buy Well type smelting furnace。

1、Brief introduction of Well type smelting furnace

Well type smelting furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，features include Easy to control, Easy to maintain, Stable and reliable, energy saving and environmental protection and Strong adaptability，it is widely used in Household necessities, automobile, building materials, metallurgy, surface treatment and other industries，be loved by our customers.。

Well type smelting furnace

2、Well type smelting furnace use

Well type smelting furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Well type smelting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal heat treatment

In addition to forging heating, Well type smelting furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Well type smelting furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Energy conservation and environmental protection

The Well type smelting furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Well type smelting furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Well type smelting furnace

3、Structural characteristics of Well type smelting furnace

The Well type smelting furnace has the following structure

1. Radiation chamber

The heat load of the main place for Well type smelting furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. Radiation chamber

The heat load of the main place for Well type smelting furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Well type smelting furnace

4、Well type smelting furnace function

Well type smelting furnaceit has the functions of heat treatment, Forging heating, temper, quench and heat treatment，it is mainly composed of convection chamber, ventilation system, furnace chamber, ventilation system and recovery of waste heat，This Well type smelting furnaceSimple structure and reliable operation.，it has the characteristics of energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Stable and reliable，is carefully developed by One-combustion energy saving combined with advanced technology。

Well type smelting furnace

5、Working principle of Well type smelting furnace

Well type smelting furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks beautiful.，customizable。

Well type smelting furnace

Well type smelting furnaceis a popular Well type smelting furnace，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。