Introduction to End in end out heating furnace, introduction to heating furnace function advantages and characteristics

End in end out heating furnaceIt is a forging heating device using gas as fuel.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the characteristics of Easy to maintain, Easy to control, energy-efficient, energy saving and environmental protection and energy-efficient，it is an ideal choice for customers to buy End in end out heating furnace。

1、Brief introduction of End in end out heating furnace

End in end out heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

End in end out heating furnace

2、End in end out heating furnace application

End in end out heating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of End in end out heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The End in end out heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Improve production efficiency

The End in end out heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal forging heating

The End in end out heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the End in end out heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

End in end out heating furnace

3、End in end out heating furnace function

End in end out heating furnaceit has the functions of heat treatment, temper, normalizing, Casting heating and quench，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has been widely used in machinery, surface treatment, shipping, chemical industry, Machinery manufacturing and other industries，Easy to control,Easy to maintain,Strong adaptability,energy saving and environmental protection,Stable and reliable，is carefully developed by One-combustion energy saving combined with advanced technology。

End in end out heating furnace

4、Functional advantages of End in end out heating furnace

End in end out heating furnaces have the following advantages.

1. Extend the service life of equipment

The End in end out heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Uniform heating

The End in end out heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. easy to operate

The operation interface of the End in end out heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Wide application range

The End in end out heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the End in end out heating furnace can significantly reduce energy consumption, thus reducing operating costs.

End in end out heating furnace

5、End in end out heating furnace structure

The End in end out heating furnace structure is introduced as follows:

1. Radiation chamber

The heat load of the main place for End in end out heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

End in end out heating furnace

6、One-combustion energy saving company discount

End in end out heating furnace is a new type of heating furnace introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for petroleum and other industries. Now consult One-combustion energy savingproduce的End in end out heating furnace, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

End in end out heating furnaceis a popular End in end out heating furnace，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。