Introduction to Well type reduction furnace, introduction to forging furnace advantages and characteristics

Well type reduction furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the characteristics of Easy to control, energy-efficient, Easy to maintain, Stable and reliable and Easy to maintain，The price is relatively low.，reliable quality。

1、Brief introduction of Well type reduction furnace

Well type reduction furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Well type reduction furnace

2、Working principle of Well type reduction furnace

Well type reduction furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Well type reduction furnace

3、Well type reduction furnace function

Well type reduction furnaceit has the functions of temper, Casting heating, quench, hardening and tempering and heat treatment，features include energy-efficient, Strong adaptability, Stable and reliable, Easy to control and energy saving and environmental protection，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.。

Well type reduction furnace

4、Structural advantages of Well type reduction furnace

The Well type reduction furnace has the following structure

1. Radiation chamber

The heat load of the main place for Well type reduction furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Radiation chamber

The heat load of the main place for Well type reduction furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Well type reduction furnace

5、Well type reduction furnace quotation

The Well type reduction furnace price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Well type reduction furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Well type reduction furnace price can meet the purchasing needs of customers.

3. Reasonable cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Well type reduction furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Well type reduction furnace

6、company strength

The company has many years of Well type reduction furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Well type reduction furnaceThe structural design is more advanced and reasonable.，the main structure includes ventilation system, convection chamber, combustor, ventilation system and recovery of waste heat，Widely used in Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating and Metal tempering。