Introduction to Continuous roll spheroidization heat treatment furnace and forging furnace advantages and features

Continuous roll spheroidization heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.。The following is to introduce the Continuous roll spheroidization heat treatment furnace:

1、Brief introduction of Continuous roll spheroidization heat treatment furnace

Continuous roll spheroidization heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Continuous roll spheroidization heat treatment furnace，the product looks atmospheric.，it is an ideal choice for customers to buy Continuous roll spheroidization heat treatment furnace。

Continuous roll spheroidization heat treatment furnace

2、Continuous roll spheroidization heat treatment furnace principle

Continuous roll spheroidization heat treatment furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a kind of high quality and low price Continuous roll spheroidization heat treatment furnace，it is widely used in material, Household necessities, petroleum, war industry and aerospace。

Continuous roll spheroidization heat treatment furnace

3、Continuous roll spheroidization heat treatment furnace use

The purpose of Continuous roll spheroidization heat treatment furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Continuous roll spheroidization heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal tempering

By properly heating and cooling the metal material, the Continuous roll spheroidization heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Continuous roll spheroidization heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal heat treatment

In addition to forging heating, Continuous roll spheroidization heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Continuous roll spheroidization heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Continuous roll spheroidization heat treatment furnace

4、Continuous roll spheroidization heat treatment furnace video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Continuous roll spheroidization heat treatment furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Continuous roll spheroidization heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

5、Continuous roll spheroidization heat treatment furnace advantage

The advantages of Continuous roll spheroidization heat treatment furnace are as follows:

1. Rapid temperature rise

The Continuous roll spheroidization heat treatment furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Uniform heating

The Continuous roll spheroidization heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. easy to operate

The operation interface of the Continuous roll spheroidization heat treatment furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Wide application range

The Continuous roll spheroidization heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Efficient combustion

The Continuous roll spheroidization heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Continuous roll spheroidization heat treatment furnace

6、Continuous roll spheroidization heat treatment furnace price

The Continuous roll spheroidization heat treatment furnace price is introduced as follows:

1. product model

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

2. Proper management mode

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

3. Quality advantages and disadvantages

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

4. product costs

Product manufacturers are different, and the cost spent by each manufacturer in producing products is definitely different. The higher the cost of producing products, the higher the price of products set by manufacturers. On the contrary, the Continuous roll spheroidization heat treatment furnace price is low.

5. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

Continuous roll spheroidization heat treatment furnace

Continuous roll spheroidization heat treatment furnaceThe use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the characteristics of energy saving and environmental protection, Strong adaptability, energy-efficient, energy saving and environmental protection and Stable and reliable。