Introduction to Roller type guide rail annealing furnace, introduction to Forging furnace advantages and characteristics

Roller type guide rail annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of Forging heating, temper, anneal, heat treatment and quench，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，is developed and improved by One-combustion energy saving。The following is to introduce the Roller type guide rail annealing furnace:

1、Brief introduction of Roller type guide rail annealing furnace

Roller type guide rail annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are energy-efficient, Stable and reliable, Strong adaptability, Easy to maintain and Easy to control，Widely used inImprove production efficiency,Metal forging heating,Metal tempering,Energy conservation and environmental protection,Metal melting and casting and so on，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，has been favored by more and more customers.。

Roller type guide rail annealing furnace

2、Roller type guide rail annealing furnace structure

The Roller type guide rail annealing furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Roller type guide rail annealing furnace

3、Roller type guide rail annealing furnace function

Roller type guide rail annealing furnaceit has the functions of quench, normalizing, heat treatment, temper and Casting heating，widely used inbuilding materials,shipping,heat treatment,aerospace,petroleum and other industries，is a Roller type guide rail annealing furnace newly developed by One-combustion energy saving。

Roller type guide rail annealing furnace

4、Roller type guide rail annealing furnace application

Roller type guide rail annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Roller type guide rail annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Roller type guide rail annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Roller type guide rail annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal heat treatment

In addition to forging heating, Roller type guide rail annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Energy conservation and environmental protection

The Roller type guide rail annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Roller type guide rail annealing furnace

5、How much is the Roller type guide rail annealing furnace?

The Roller type guide rail annealing furnace price is introduced as follows:

1. Low cost of raw materials

Cost is a direct and fundamental factor that affects the price of Roller type guide rail annealing furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Roller type guide rail annealing furnace price, low in cost and low in price.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Roller type guide rail annealing furnace have more or less differences in price.

3. raw material

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Roller type guide rail annealing furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Roller type guide rail annealing furnace price can meet the purchasing needs of customers.

Roller type guide rail annealing furnace

6、One-combustion energy saving's strength

The company has many years of Roller type guide rail annealing furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Roller type guide rail annealing furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，energy-efficient,energy saving and environmental protection,energy-efficient,Easy to maintain,Easy to control，structure mainly includes: ventilation system, convection chamber, recovery of waste heat, Radiation chamber, ventilation system and so on。