Introduction to Deep well high-temperature annealing furnace and Forging furnace advantages and features

Deep well high-temperature annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，in the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the product looks beautiful.，at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it is widely used in petroleum, war industry, Household necessities, Machinery manufacturing, aerospace and other industries。

1、Brief introduction of Deep well high-temperature annealing furnace

Deep well high-temperature annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

Deep well high-temperature annealing furnace

2、Structural characteristics of Deep well high-temperature annealing furnace

The Deep well high-temperature annealing furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. Radiation chamber

The heat load of the main place for Deep well high-temperature annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Deep well high-temperature annealing furnace

3、Deep well high-temperature annealing furnace field real shot

Deep well high-temperature annealing furnace are widely used. The following is a multi-directional display diagram of Deep well high-temperature annealing furnace, and the details are full of quality and intelligence.。

Deep well high-temperature annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Deep well high-temperature annealing furnace principle

Deep well high-temperature annealing furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Deep well high-temperature annealing furnace

5、Deep well high-temperature annealing furnace quotation

The Deep well high-temperature annealing furnace price is introduced as follows:

1. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Deep well high-temperature annealing furnace price and service can meet the actual needs of customers.

3. market

The difference between the supply and demand of manufacturers and customers will also affect the Deep well high-temperature annealing furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Deep well high-temperature annealing furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Deep well high-temperature annealing furnace price will decrease.

4. Brand strength

At present, there are various brands of Deep well high-temperature annealing furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Deep well high-temperature annealing furnace are different.

5. Company size

Reliable manufacturers can produce excellent products, and such manufacturers have high comprehensive credibility and can design products in all directions. Therefore, compared with other manufacturers, such products have higher scientific and technological content and more functions. One-combustion energy saving's reputation and products are very high, and it is a trustworthy big brand and manufacturer.

Deep well high-temperature annealing furnace

6、One-combustion energy saving delivery site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Deep well high-temperature annealing furnace

As you can see from the live video.One-combustion energy saving multifunctional, with functions such as anneal, Forging heating, hardening and tempering, normalizing and heat treatment。

Deep well high-temperature annealing furnacethe product looks beautiful.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。