What is a Energy saving and environmentally friendly chain annealing furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Energy saving and environmentally friendly chain annealing furnaceIt is a forging heating device using gas as fuel.，Strong adaptability,energy saving and environmental protection,Easy to maintain,energy-efficient,Strong adaptability。The following is to introduce the Energy saving and environmentally friendly chain annealing furnace:

1、Brief introduction of Energy saving and environmentally friendly chain annealing furnace

Energy saving and environmentally friendly chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as hardening and tempering, Casting heating, anneal, normalizing and normalizing，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Energy saving and environmentally friendly chain annealing furnace

2、Energy saving and environmentally friendly chain annealing furnace advantage

The advantages of Energy saving and environmentally friendly chain annealing furnace are as follows:

1. easy to operate

The operation interface of the Energy saving and environmentally friendly chain annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving and environmentally friendly chain annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Uniform heating

The Energy saving and environmentally friendly chain annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Energy saving and environmentally friendly chain annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Energy saving and environmentally friendly chain annealing furnace

3、Video analysis of Energy saving and environmentally friendly chain annealing furnace

You can buy Energy saving and environmentally friendly chain annealing furnace according to your needs and show you Energy saving and environmentally friendly chain annealing furnace videos.。

Energy saving and environmentally friendly chain annealing furnace

As you can see from the live video.，One-combustion energy saving Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

4、Structural characteristics of Energy saving and environmentally friendly chain annealing furnace

The Energy saving and environmentally friendly chain annealing furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

3. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Energy saving and environmentally friendly chain annealing furnace

5、Advantages of Energy saving and environmentally friendly chain annealing furnace principle

Energy saving and environmentally friendly chain annealing furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It has a wide range of uses, and is often used inMetal tempering,Metal melting and casting,Energy conservation and environmental protection,Metal forging heating,Metal heat treatment and so on，it mainly includes recovery of waste heat, Radiation chamber, combustor, convection chamber and ventilation system，it has the functions of Forging heating, Casting heating, heat treatment, quench and temper，is a kind of Energy saving and environmentally friendly chain annealing furnace manufactured by One-combustion energy saving。

Energy saving and environmentally friendly chain annealing furnace

6、Energy saving and environmentally friendly chain annealing furnace structure

The Energy saving and environmentally friendly chain annealing furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Energy saving and environmentally friendly chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Energy saving and environmentally friendly chain annealing furnace

Energy saving and environmentally friendly chain annealing furnaceis a popular Energy saving and environmentally friendly chain annealing furnace，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，The overall structural design is relatively simple，structure mainly includes: Radiation chamber, ventilation system, ventilation system, recovery of waste heat, combustor and so on。