What is a Multi station annealing industrial furnace? How much is the price of the forging furnace?

Multi station annealing industrial furnaceIt is a forging heating device using gas as fuel.，The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a Multi station annealing industrial furnace，It is mostly used in Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment, Metal tempering, Metal melting and casting and so on，widely used inaerospace,chemical industry,pharmacy,heat treatment,surface treatment and other industries。

1、Brief introduction of Multi station annealing industrial furnace

Multi station annealing industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Easy to maintain,energy-efficient,energy saving and environmental protection,Easy to control,Strong adaptability，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，support customization。

Multi station annealing industrial furnace

2、Introduction of Multi station annealing industrial furnace characteristics

Multi station annealing industrial furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Multi station annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Multi station annealing industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Multi station annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Multi station annealing industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Multi station annealing industrial furnace

3、Advantages of Multi station annealing industrial furnace principle

Multi station annealing industrial furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，is a Multi station annealing industrial furnace newly developed by One-combustion energy saving。

Multi station annealing industrial furnace

4、Multi station annealing industrial furnace use

The purpose of Multi station annealing industrial furnace is introduced as follows:

1. Metal forging heating

The Multi station annealing industrial furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal tempering

By properly heating and cooling the metal material, the Multi station annealing industrial furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Multi station annealing industrial furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi station annealing industrial furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Multi station annealing industrial furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Multi station annealing industrial furnace

5、Multi station annealing industrial furnace HD real shot

Speak directly with facts on the spot。

Multi station annealing industrial furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

6、Real-time shooting in One-combustion energy saving's production workshop

The finished products of the Multi station annealing industrial furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Multi station annealing industrial furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Multi station annealing industrial furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。